# How to organize LinkedIn leads into groups
> Learn how to segment LinkedIn leads by profile fit and source so each campaign gets a message that fits the group without overlap and generic pitches.
- HTML: https://getkinlead.com/building-linkedin-lead-groups
- Markdown: https://getkinlead.com/building-linkedin-lead-groups.md

**Short answer:** Segmenting LinkedIn leads means dividing prospects into groups that share a trait you can act on, such as job title, company size, or how you found them. Each group gets its own message and campaign so people do not get a pitch that ignores their situation.

## Start with the problem each group shares

A lead list with no groups becomes one bucket. If you send the same message to a founder of a two-person company and a VP of Sales at a large firm, it will feel generic to both.

Useful segmentation starts with a problem the group shares. The message should be able to name the problem and what you do about it. That only works if everyone in the group actually deals with the problem.

A group can be small. The test is whether you can write one sentence that only fits that group. If the sentence would work for anyone on LinkedIn, the group is too broad.

Write the group name as a sentence: marketing managers at seed-stage startups who are hiring their first demand gen person. That name tells you what to write.

**One list, one message**

- A list of marketing managers with no shared problem
- A message about general features
- A pitch asking for a call to learn more

**Groups with a shared problem**

- Marketing managers at seed-stage startups working on growth
- Marketing managers at large firms working on approval steps
- Messages that name the growth problem for the first group and the approval problem for the second

## Pick criteria that change the message

You need rules to decide where a person belongs. Too many criteria make groups too small to use. Too few keep your message generic.

Group leads by combining how you found them with who they are. A person who commented on a competitor's post has more intent than someone who only matches a job title in a search. The source gives you a reason to write.

Do not use more than two criteria at first. A group defined by title, industry, company size, technology and location will be empty or too small to use. Start with source plus one firmographic trait.

If you use a search filter, save the search. If you use a competitor post, save the post URL. The saved source is what lets you write the message later.

| | Criteria | Example group | What the message can say |
| --- | --- | --- | --- |
| Source | People who commented on a competitor's post | Name the gap the competitor left open |
| Intent | People posting about the problem this week | Reference the point they made in their post |
| Company size | Small companies | Talk about adding process without adding headcount |
| Role | Founders and VPs | Founders care about cost; VPs care about team workload |

## Build the list outside LinkedIn

LinkedIn's interface does not do complex grouping. You need a spreadsheet or a tool that keeps groups separate. The goal is clean lists you can import into outreach without mixing personas.

Put the group name in the file name. A file called leads.csv will get mixed with every other export. A file called competitor-commenters-acme.csv tells you what is inside.

Do not edit the profile URL column. That is the only field your outreach tool needs to match the person.

1. **Export your raw lead list.** Pull your total list of prospects into a CSV file with their LinkedIn profile URLs.
2. **Add a segment column.** Create a new column in your spreadsheet named Segment or Group.
3. **Label each lead.** Assign a label to each row, such as Competitor_Commenter or Seed_Founder.
4. **Split into separate files.** Filter by the segment column and save each group as its own CSV file.

## Keep one group per active campaign

Overlap is the failure to watch for. A lead ends up in two groups and gets two different messages from you at once. That looks careless to the person on the other side.

Keep a strict one-to-one relationship between a lead group and an active campaign. If you want to test a new message on an old group, pause the first campaign and move the leads to a new group first.

The campaign goal should match the group. A group of people who commented on a competitor's post can take a message about the competitor. A group of people who match a title search needs a message about the problem, not the competitor.

If you run two campaigns at once, check the groups before you launch. The second campaign should point at a different group.

- **you:** Hi Sarah, I saw your comment on Acme Corp's post about lead scoring. Most teams struggle with the setup step, which is why we built a template for it.
- **them:** That is exactly where we are stuck right now. How does your template handle dirty data?
- **you:** It checks for missing fields before the record reaches your list. Do you have 15 minutes Tuesday to see it?

> A lead can sit in two groups, but only one active campaign should be able to message them.

## What to do when a lead fits two groups

A person who commented on a competitor's post and also matches your job title search belongs in two groups. Pick the group that gives you the better reason to write. The comment is a public action. The job title is a static fact. Use the comment group first.

If you cannot decide, put the lead in the group with the narrower message. A small group of people who all commented on the same post can take a more specific message than a large group that shares a title.

A lead can sit in two groups in your spreadsheet. That is fine. The problem is two active campaigns. Keep the label that gives you the better message, and note the other label in a second column so you do not lose the history.

If a lead replies, move them to a replied group. That stops a new campaign from sending a first-touch message to someone who already talked to you.

| | Situation | Where to put the lead |
| --- | --- | --- |
| Commented on a competitor post and matches your title search | Competitor commenter group, because the comment gives you a reason to write |
| Replied to a previous campaign and matches a new search | Replied group, so you do not send a first-touch message |
| Changed jobs and now fits a different group | New group, and remove the old label |

> When two groups both fit, the source beats the title. The source tells you why the person is worth a message today.

## Refresh groups before you reuse them

A group is a snapshot. People change jobs, companies change size, and a person who ignored a message last quarter may have a new role now. Before you point a new campaign at an old group, check for job changes. Remove anyone who replied. Archive the old group so you do not use it by mistake.

Keep a simple log of when each group was last used and which campaign used it. That log stops you from sending the same message twice to the same person.

Check the source column too. A competitor post from six months ago may still be a good reason to write, but the comment thread is old. If the post is stale, use the job title group instead.

> A group you have not opened in a month is a draft, not a list. Check it before you send.

## Doing this with Kinlead

Kinlead scores each lead from 0 to 100 against the customer you describe or your website. Leads below the fit line are not kept. The ones you keep live in lead groups, and any campaign can point at any group.

Leads can be exported to CSV or imported from a CSV of LinkedIn profile URLs. The Steal Customers agent watches competitor company pages and optional founder or employee profiles, reads the comments on their recent posts, and turns commenters who look like buyers into leads. Each lead keeps the post URL, what the post was about and what they commented.

The [lead groups and scoring](/features/lead-groups-and-scoring) page shows how groups and the fit line work.

1. **Automate lead discovery.** Use the Steal Customers agent to watch competitor pages and optional founder or employee profiles. It reads comments on recent posts and turns commenters who look like buyers into leads.
2. **Score and group.** Describe your customer or provide your website. Kinlead scores leads from 0 to 100 and keeps those above your fit line.
3. **Launch targeted campaigns.** Point a campaign at a lead group. Import profile URLs from a CSV or use the built-in search.
4. **Manage via API.** Use the REST Agent API or MCP server to find leads and check replies through Claude, ChatGPT, Cursor, Claude Code, Codex and other MCP clients.

## Related

- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [Steal customers agent](https://getkinlead.com/features/steal-customers.md)
- [Book a demo](https://getkinlead.com/demo.md)

## Common questions

**Should I group leads by industry or job title first?**

Group by the biggest problem. If a job title across different industries faces the same problem, group by title. If the problem is industry-specific, group by industry.

**How often should I refresh my lead groups?**

Refresh your groups monthly. People change jobs and companies grow, so a lead in a seed-stage segment last year might now fit an enterprise segment.

**Can I move a lead from one group to another?**

Yes. Move leads to a contacted or closed group after they finish a campaign sequence to stop them from being re-added to a new search.

**How many leads should be in a group?**

Enough that the message still makes sense, and small enough that you can name the shared problem. If you cannot write one sentence about why they got the message, the group is too broad.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
