# How to run LinkedIn outbound for partner companies
> Coordinate LinkedIn outreach between two companies so you target the same leads without spamming people or risking restrictions on either LinkedIn account.
- HTML: https://getkinlead.com/coordinate-outreach-for-joint-ventures
- Markdown: https://getkinlead.com/coordinate-outreach-for-joint-ventures.md

**Short answer:** To run LinkedIn outbound for a partner company, split your lead lists or sequence your messages so the same person does not get hit by two brands at once. Decide who owns the first touch, keep a shared record of every contact, and move to a group chat when the lead shows interest. The second touch should feel like a referral, not a coordinated attack.

## Define the lead ownership

Two companies can target the same buyer without stepping on each other, but only if someone owns the first touch. If a lead gets two connection requests for the same joint offer on the same day, they will likely ignore both. Pick one person or one account to make the first move, and write that rule down before either side sends anything.

The simplest split is by a lead attribute you can both see. Partner A takes healthcare accounts, Partner B takes finance accounts. Or Partner A takes companies above a certain size, Partner B takes the rest. You can also split by funnel stage: one partner opens the conversation, the other joins after the lead replies. A split by industry is easy to explain to the lead. A split by account tier is easier to keep clean if you sell to different company sizes. A split by funnel stage works when one partner has a warmer relationship.

Keep a shared list with columns for company, contact name, LinkedIn URL, owner, first contact date, last contact date and notes. A spreadsheet works. A shared doc works. What matters is that both sides check it before they send a request. Update the sheet after every reply, not just after every send. A lead who replies to Partner A should not get a fresh request from Partner B the next morning. If you skip this step, you will find out about the overlap when the lead tells you.

**Uncoordinated approach**

- Both partners export the same list and send identical invites.
- Partners check in once a week to see who contacted whom.
- Leads receive two requests for the same joint offer within 24 hours.

**Coordinated approach**

- Partner A takes healthcare leads, Partner B takes finance leads.
- Partner A qualifies the lead, then introduces Partner B in a group chat.
- Partner A sells the software while Partner B sells the implementation.

## Coordinate the messaging sequence

If you want both partners to touch the same person, sequence the messages. The first partner sets the stage, and the second partner adds the specific value. This makes the second touch feel like a referral instead of a repeat.

Do not use the same script. Identical language looks like a bot and wastes the trust the first message built. Partner A should focus on the problem, the relationship or the reason you are reaching out. Partner B should focus on the solution, the technical fit or the implementation detail. The second partner should mention the first partner by name. 'I saw you spoke with Priya at Acme' is a natural opener. It tells the lead this is a joined-up conversation, not a random second pitch.

Leave a gap between touches. A day or two is enough for the lead to see the first message, check the profile and decide whether to reply. If the first partner gets a reply, pause the second partner until you know whether the lead wants to talk to one company or both. If the lead replies to the first partner and asks about the second partner's service, do not wait for the cooldown. Make the introduction then.

- **you:** Hi Sarah, I'm working with the team at Northwind on a new way to solve supply chain delays. Would you be open to a brief chat about it?
- **them:** Sure, I've been seeing some delays lately. What's the approach?
- **draft:** Glad to hear it. I'll loop in Mark from Northwind here. He's the one who built the actual tracking tool we're using to fix this.

> Never have both partners send a connection request at the same time. Wait for the first request to be accepted before the second partner engages.

## Manage account limits and pacing

LinkedIn does not publish exact daily limits for invites and messages. Each account has its own history, and the limit you can work within depends on that history. Pushing two accounts hard in the same niche can increase the risk of flags, so agree on a pace both sides can keep. If one account has a newer history, give it a lower cap. Do not copy the cap from the older account just because it works there.

Coordinate your daily caps. If both partners send at full speed, you may exhaust the lead pool or trigger warnings on one account. Give the lead a cooldown period between touches. If one partner gets a warning, stop that account and let the other partner continue without mentioning the warning. Track pending invitations too. If one partner has a pile of pending invites, pause new requests until some are accepted or withdrawn. A healthy pending pool makes the next request more likely to land.

1. **Set a daily cap.** Agree on a maximum number of connection requests per day for each account. Write the number in the shared sheet so neither side guesses.
2. **Implement a cooldown.** Wait 48 to 72 hours between a message from Partner A and a message from Partner B. Use the lead's time zone when you set the window.
3. **Sync a tracking sheet.** Use a shared document or CSV to mark the exact date and time a lead was contacted. Update it before you send the next request.

## Handle the hand-off

Leads often reply to the partner they find more interesting, regardless of who started the chat. You need a protocol to move that lead to the right person without making the experience clunky. The goal is to stop the lead from repeating their requirements to two different people.

Move the conversation from a one-to-one chat to a group chat or a scheduled meeting quickly. Introduce the other partner by name, explain why they are in the thread and give the lead one clear next step. Do not make the lead chase either of you. If the lead asks a technical question that only Partner B can answer, bring Partner B in immediately. Do not try to relay the question through a middleman.

| | Scenario | Action |
| --- | --- | --- |
| Lead asks Partner A about Partner B's service | Partner A introduces Partner B in a group message immediately. |
| Lead ignores Partner A but accepts Partner B | Partner B leads the conversation and mentions the partnership naturally. |
| Lead replies to both partners | The partner with the stronger existing relationship takes the lead. |
| Lead asks for a meeting with both partners | Send one calendar link and let both partners join the same call. |

## Agree on lead scoring and disqualification

Both partners need the same definition of a good lead. If Partner A counts any reply as a win and Partner B only counts a booked call, you will argue about the list every week. Write down what makes a lead worth a second touch and what makes you stop.

Use simple rules. A lead is worth a second touch if they match the target company size, have a role related to the problem and replied with a question or a request for more detail. A lead is disqualified if they say they have no need, ask you to stop or work for a competitor you cannot serve together.

Share the reason a lead was disqualified. This helps both partners avoid the same bad-fit accounts and keeps the joint list clean. If one partner disqualifies a lead, the other partner should not send a fresh request without a new reason. Use a shared note for every disqualified lead. 'No budget this quarter' is useful to both partners. 'Not a fit' is not.

## Doing this with Kinlead

Kinlead can run the outreach for each partner from separate LinkedIn accounts while keeping the lead lists apart. You connect each account through Unipile, a third-party LinkedIn provider, and Kinlead never stores the LinkedIn password. Each account sends at most one action every 5 minutes, inside daily invite and message limits you set and inside a send window in the lead's time zone.

Create a separate [lead group](/features/lead-groups-and-scoring) for each partner so campaigns do not overlap on the same people. If you want to find people talking about a partner's competitors, the Steal Customers agent watches competitor company pages and optional founder or employee profiles, reads the comments on recent posts, and turns commenters who look like buyers into leads. Each lead keeps the post URL, what the post was about and what they commented. You can pause any campaign. Queued campaign messages can be read and edited on the Actions page before they send. Each campaign chooses how replies are handled: hand the conversation to you at the first reply, let the AI reply until there is real interest, or let the AI reply until a meeting is booked using your scheduling link.

1. **Organize lead groups.** Create distinct groups for each partner so campaigns do not overlap on the same people.
2. **Set human pacing.** Configure send windows and daily limits so each account sends at most one action every 5 minutes.
3. **Automate the intro.** Use AI-written notes under 200 characters that explain why the lead was selected for the joint offer.
4. **Manage replies.** Replies from every campaign land in one inbox, classified by intent, with interested replies first. You get an email when someone replies.

## Related

- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [Unified inbox](https://getkinlead.com/features/unified-inbox.md)

## Common questions

**Can we use the same lead list for both companies?**

You can, but do not send messages from both accounts at the same time. Split the list or sequence the messages so there is a gap between touches.

**What happens if LinkedIn restricts one of the partner accounts?**

Stop all outreach on that profile immediately. The other partner can continue, but should avoid mentioning the restricted account until the issue is resolved.

**Should we use a joint LinkedIn page or personal profiles?**

Use personal profiles for the actual outreach because people reply to a person. Use company pages as context and social proof, not as the main sender.

**Who should own the first touch?**

The partner with the stronger relationship or the clearer reason to reach out. If neither side has a relationship, the partner who sells the first part of the solution should open the conversation.

**How do we split the list without sharing a spreadsheet?**

Use a shared view or a simple CSV that both sides update before each send. The tool matters less than the rule that nobody sends without checking the owner column.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
