# How to find B2B leads through shared volunteer work
> Find B2B prospects on LinkedIn by searching the non-profits they list in their Volunteer section, then opening with a shared cause instead of a product pitch.
- HTML: https://getkinlead.com/find-leads-via-shared-volunteer-experience
- Markdown: https://getkinlead.com/find-leads-via-shared-volunteer-experience.md

**Short answer:** You can find B2B prospects by searching for specific non-profits in the main LinkedIn search bar and filtering the results to people. This surfaces executives who list the same cause on their profile, which gives you an opening that reads like a peer note. Confirm the volunteer role on each profile before you save the lead.

## Why volunteer data beats job titles

Job titles tell you what someone does for a living. Volunteer work tells you where they spend their evenings and what they argue about at dinner. Targeting by title alone puts you in the same queue as everyone who bought the same list. Opening with a cause the person lists on their own profile shows you read past the headline, and it's the kind of detail a template can't fake.

A VP of Sales is a generic target. A VP of Sales who sits on the board of a local animal shelter is a specific person with an interest you can name in one sentence. That sentence costs you nothing to write and gives the reader a reason to keep going that has nothing to do with your product.

The dynamic changes as well. A message built on a shared cause reads like one professional noticing another. You may still sell something eventually, but you've earned a couple of sentences of real attention first, and that's usually the hard part.

**Title-only opener**

- I see you're the VP of Sales at Acme.
- We help VPs of Sales hit their number.
- Do you have 15 minutes for a demo next week?

**Cause-led opener**

- I noticed you've been involved with the Red Cross for a few years.
- It's rare to meet other sales leaders who give that kind of time to youth mentoring.
- I work on pipeline tooling and would like to connect with someone who thinks about this stuff.

## Pick causes you can talk about honestly

This only works if you can hold a conversation about the cause. Pick one or two organizations you actually know: one you donate to, one a friend runs, one in your own city. If the prospect asks what you do for the cause and you go quiet, the opener collapses and you've spent your one good line.

Your own profile should back it up. Add your volunteer work to LinkedIn before you start searching, with the organization name spelled the way it appears on their page. People check. A quick look at your profile should show the same cause you just mentioned.

If you have no volunteer history, use another shared detail: a school, a sport, a city, a conference you both attended. The method is the same. Find something true about both of you and lead with that.

> You should be able to write two sentences about the cause without looking it up. If you can't, pick a different cause.

## How to find prospects via specific causes

LinkedIn's search has no Volunteer filter, so you can't tick a box and get a list. You find this data with keywords, then confirm it on each profile. It's slower than a filter and more accurate.

Search for organizations, not abstract causes. Habitat for Humanity returns people who list it. Climate returns noise: job titles, hashtags and posts. The narrower the name, the cleaner the list.

1. **Search the organization name.** Type the exact name into the LinkedIn search bar, the same box you use to look up people. Put quotation marks around multi-word names so the search treats the name as one phrase.
2. **Filter to people.** Click People in the result tabs to drop companies, groups and posts. You want profiles you can open and read.
3. **Add professional filters.** Open All filters and set current company, industry, seniority or location. Keep the list to people who could plausibly buy from you, or you'll spend the week reading profiles for fun.
4. **Confirm the volunteer role.** Open each profile and scroll to the Volunteer section. Some people log board seats under Experience instead, so check both. Note the organization, the role and whether it's current.
5. **Save the profile URL.** Copy each URL into a spreadsheet or a lead group as you go. Searching the same cause twice is how lists get lost.

## Qualifying your lead list

Not every volunteer is a buyer. Two checks keep the list useful: can this person influence a purchase, and is the volunteer work current?

Recency matters more than people expect. Someone who listed a board seat years ago and hasn't mentioned the cause since is a weaker opener than someone posting about a fundraiser last month. The first person may not even remember the role.

Run the list against the table below before you write a single message. Twenty qualified names beat two hundred you have to re-check later.

| | Factor | What to look for | Red flag |
| --- | --- | --- | --- |
| Cause match | A named organization or board seat you recognize | The word volunteer alone with no organization attached |
| Role match | A title that suggests budget or sign-off | Individual contributor in a function that never buys from you |
| Recency | A current role, or a post about the cause in the past year | A one-line entry from years ago with nothing since |

## Writing the first message

The first message has one job: get the connection request accepted. Three sentences is enough. What you noticed, why it matters to you, and a light reason to connect.

Name the organization. I saw you're involved with the Literacy Project lands better than I saw you care about education. One is a fact from their profile. The other is a guess about their personality.

Leave the product out of the first message. If the opening line mentions a demo, you've turned someone's volunteer work into a lead source, and most readers can feel that from the first sentence.

- **you:** Hi Sarah, I saw you've been involved with the Literacy Project for a few years. I've followed their adult education work since a friend taught there, and it's rare to meet other CMOs who give that kind of time. I work on marketing tooling and would like to connect with someone who thinks about this stuff.
- **them:** Thanks, that's kind. The Literacy Project is close to my heart. Happy to connect.
- **you:** Appreciated. What are you working on with them this year?

> Keep the first message short enough to read in one glance. If you can't say what you noticed in one line, the opener isn't specific enough yet.

```
Hi {first name}, I saw you're involved with {organization}. I've followed their {program or campaign} work for a while, and it's rare to meet other {role} who give that kind of time. I work on {problem area} and would like to connect with someone who cares about this.
```

## What happens after they accept

Acceptance is where most people ruin it. The connection request was the ask. Now you owe them a normal conversation, which means short replies and no calendar link in the second message.

Reply once, ask a real question about the cause, then stop. If they ask what you do, answer in one plain line and let them decide what happens next. Move toward a sales conversation only when they raise a problem of their own.

Keep a short note of who replied and what they said. When you run the same search again in three months, you don't want to reopen with the same question they already answered.

- Send one follow-up at most, and only if they replied.
- Comment on a post about the cause once, with something specific, then leave it.
- Wait for them to ask what you do before you describe the product.
- Log each reply so the next search doesn't repeat the same opener.

## Doing this with Kinlead

Kinlead doesn't search Volunteer sections for you. What it does is hold the list you build here and score each person from 0 to 100 against the customer description you give it or pull from your website. Leads below the fit line are dropped, so the names you keep are the ones worth messaging.

Paste the profile URLs you saved into a [lead group](/features/lead-groups-and-scoring) from a CSV, or import them directly, and point a campaign at that group. Connection requests can carry an AI-written note under 200 characters that opens with why that person became a lead, which is where the volunteer detail belongs.

Sending runs from your own LinkedIn account at most one action every 5 minutes, inside the daily limits and [send windows](/features/campaigns-and-send-windows) you set in the lead's time zone. Replies from every campaign land in one [inbox](/features/unified-inbox), classified by intent, with interested replies first.

## Related

- [Find leads](https://getkinlead.com/tools/find-leads.md)
- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)

## Common questions

**Is it creepy to mention someone's volunteer work in a first message?**

No, because volunteer work is public information they chose to display on their profile. As long as you are genuine and don't pivot to a hard sell in the same breath, it reads as attentive.

**Should I target a wide range of non-profits or just one?**

Start with one or two organizations you actually care about. If you mention a cause you have no connection to, the prospect will notice the lack of sincerity in the first reply.

**What if the person doesn't have a Volunteer section but mentions a cause in their bio?**

Treat those as strong leads. Someone who puts a cause in their headline or About section has made it part of how they want to be seen, which is a good opening.

**Can Kinlead find people by the non-profits they list?**

No. Kinlead scores people against your customer description but does not read Volunteer sections. You find those people with the search steps above and import their profile URLs into a lead group.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
