# How to give a price range on LinkedIn
> Give a price range on LinkedIn that filters budget without locking you into a quote. Use a broad window, a clear qualifier and a short call for the final price.
- HTML: https://getkinlead.com/handle-prospect-asking-for-price-range-linkedin
- Markdown: https://getkinlead.com/handle-prospect-asking-for-price-range-linkedin.md

**Short answer:** To give a price range on LinkedIn, name a broad window that covers your typical projects and say the final quote depends on scope. That filters people who cannot afford your work and gives you a reason to ask for a short call.

## Why a single number causes trouble

Giving one exact number before you know the scope of a project is a risk. If the number is too high, you lose a lead who might have had a smaller, viable project. If it's too low, a high-value client might assume your quality is low or you'll underquote a complex job. The lead also anchors on that number, and every later change feels like a bait and switch.

A price range acts as a filter. It tells the prospect which tier of the market you occupy. It lets you find out if the person can afford your services without committing to a fixed price before you've seen their requirements. The range also gives you a natural reason to ask about scope, because the top of the window depends on what they need.

The range should feel like a real answer. A vague line like 'it depends' makes the lead work harder to get a number. A range with a clear qualifier gives them something to compare against their budget and keeps the conversation moving.

**Single price approach**

- It costs $5,000.
- Our monthly retainer is $2,000.

**Price range approach**

- Most of our projects land between $3,000 and $10,000 depending on the scope.
- Our monthly retainers usually run between $1,500 and $4,000 based on the volume of deliverables.

## How to set your range before you reply

The goal is to be honest about your pricing while leaving room to negotiate based on the actual work. You want a range that is wide enough to cover most scenarios but narrow enough to actually qualify the lead. A range that starts at your absolute minimum and ends at your most common large project is usually enough.

If your range is too broad, like $1,000 to $50,000, it doesn't provide any real information and looks like you're dodging the question. Keep the window realistic to your most common deals. If most of your work sits between $4,000 and $9,000, say that. If you have a smaller starter offer, name it as a separate line.

Write the range down before you reply. Pick the floor, the ceiling and the two scope factors that move the price. That way you don't improvise a number under pressure and create a promise you have to walk back.

If you have a minimum engagement, state it as the floor. 'We start at $3,000' is clearer than a range that starts at $500 and never applies. The floor protects your time and gives the lead a real number to react to.

1. **Find your floor.** Identify the absolute lowest price you will accept for a project that still makes sense for your business.
2. **Find your common ceiling.** Look at your last five high-end projects and identify the average price of those larger engagements.
3. **Set the window.** Place your floor as the start and your common ceiling as the end of the range.
4. **Add the qualifier.** Explicitly state that the final cost depends on the specific goals and deliverables you agree upon.

| | Situation | What the range should cover | Example wording |
| --- | --- | --- | --- |
| Small one-off project | Your floor and the price of your largest common one-off job | Most of these projects land between $2,000 and $6,000. |
| Monthly retainer | Your lowest retainer and your typical retainer for a full scope | Retainers usually run between $1,500 and $4,000 a month, based on the work involved. |
| Custom build | The starting price for the smallest build and the average of your last few larger builds | Typical builds start around $8,000 and go to $25,000 for a larger scope. |

## How to write the reply

When a lead asks for pricing, they're often checking if you're in their league. If you refuse to answer, you create friction. If you answer too bluntly, you end the conversation. The best response provides the range and immediately pivots to a call.

The pivot matters. Use the range as a reason to ask for a short call. You need to know their scope to place them inside the window. Keep the ask small: 10 minutes and two questions.

If the lead pushes for an exact number, give the range again and ask one scope question. 'The exact number depends on how many locations you need. Is it one site or five?' That moves the conversation forward without turning the reply into a quote.

- **them:** This looks interesting. How much does this actually cost?
- **you:** It depends on the scope, but most projects land between $2,000 and $7,000. That covers smaller setup work and larger ongoing management.
- **you:** To give you an exact number, I need to know a bit more about your current setup. Do you have 10 minutes on Thursday to clarify a few details?

```
Thanks for asking. Most of our [project type] work lands between [floor] and [ceiling], depending on scope. The final quote depends on [scope factor one] and [scope factor two]. If you share [one detail], I can tell you where you sit in that range. Do you have 10 minutes on [day]?
```

## What to do when they say it's too expensive

Some leads will tell you the range is too high. This is a successful qualification because it saves you from spending hours on a proposal for someone who cannot pay you. How you respond determines if you can still find a way to work together.

Avoid the urge to immediately drop your price. Lowering your price without lowering the scope of work signals that your initial range was fake. It also teaches the lead that your first number is negotiable, which makes every later conversation harder.

Ask one question before you offer anything: 'What budget did you have in mind?' Then choose a path. You can scale the scope, refer them elsewhere or end the conversation. State the path you choose and move on.

If they ask for a discount, trade scope for price. Remove a deliverable, reduce the timeline, cut the number of locations or change the start date. A lower price with the same scope tells the lead your range was a guess.

- Ask if they have a specific budget they need to stay within.
- Offer a scaled-back version of your service that fits their budget.
- Refer them to a partner or a cheaper alternative if you cannot help them.
- Walk away politely if the budget gap is too large to bridge.

> Never apologize for your pricing. If the gap is too large, the fit is wrong.

## When to bring up price in the conversation

Putting pricing in the first message can make you look like a commodity and may scare off leads before they understand your value. Wait for them to ask, or wait until the second or third message. If you sell a product with a published starting price, you can mention it earlier. If your work is custom, keep the range for the reply.

A useful rule: answer the price question when it appears. Dodging it makes the lead push harder. If they ask in the connection request, use a short line and move the detail to messages. 'Most projects land between $2,000 and $7,000. Happy to share where yours fits.' That gives them a benchmark without a full quote.

If you sell to two different buyers, keep two ranges. A 40-person agency buying a retainer and a startup buying a one-off setup have different budgets and different scope questions. Using one range for both makes the number feel random. Write a separate line for each buyer and use the one that matches the person in front of you.

When the lead gives you a budget first, repeat it back and place it in your range. 'That sits in the lower part of our range. We can do X at that level.' This shows you listened and makes the next step concrete.

Keep a short version for comments and a longer version for messages. In a comment, say 'Most projects land in the $2,000 to $7,000 range.' In a message, add the scope factors and the call ask. The short version starts the conversation; the longer version qualifies it.

## Doing this with Kinlead

Kinlead can use your sales playbook to write messages and follow-ups that include your range and budget question. You add the playbook to a campaign, and the AI writes from the campaign goal, tone and your script. You can set a campaign to let the AI reply until the lead books a meeting with your scheduling link, or hand the conversation to you at the first reply. If you want to review every reply before it sends, use hand-off mode.

You can put your range and the budget question in a [sales playbook](/ai-sales-playbook-for-linkedin-outreach) so the replies stay consistent as the conversation moves.

## Related

- [AI sales playbook for LinkedIn](https://getkinlead.com/ai-sales-playbook-for-linkedin-outreach.md)
- [Booking LinkedIn demos](https://getkinlead.com/use-cases/book-linkedin-demos.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)

## Common questions

**Is it better to give a range in the first message or wait for them to ask?**

Wait for them to ask or wait until the second or third message. Putting pricing in the first message can make you look like a commodity and may scare off leads before they understand your value.

**Should I use monthly or annual pricing in my range?**

Use whichever is your primary billing method. If you offer both, provide the monthly range as it's easier for leads to compare against their current monthly spend.

**What if my pricing is completely custom for every client?**

Even custom services have a typical starting point. Give a range based on your most common project sizes and explain that these are typical benchmarks.

**What if they ask for an exact quote in the first message?**

Give the range and ask one scope question. A short call is the fastest way to turn a range into an exact quote.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
