# How to handle i'm not the right person replies on LinkedIn
> Turn a rejection into a referral. Learn how to ask for the correct stakeholder when a prospect says they aren't the right person without sounding demanding.
- HTML: https://getkinlead.com/handling-wrong-person-linkedin-replies
- Markdown: https://getkinlead.com/handling-wrong-person-linkedin-replies.md

**Short answer:** When a prospect says they aren't the right person, don't apologize and disappear. Use the reply to get a warm internal referral by asking for the specific name and role of the person who handles the problem you solve. This turns a dead end into a lead that already has context.

## Why you shouldn't just say thanks

Most people treat a not the right person reply as a hard rejection. They send a polite thank you, archive the thread and move to the next name on the list. That throws away the only warm contact you have inside that company, and warm contacts are the hard part of outbound.

The person who replied opened your message, read it and took a moment to type an answer. They know your name and what you do. That makes them the shortest route to the actual buyer, and most of the time they can name that person without checking anything.

A referral also changes how the next message lands. When you write to someone and say a colleague pointed you their way, you arrive with context instead of arriving cold. The new contact can check with the referrer in ten seconds, and that check turns you into a real person rather than another automated pitch.

None of this requires the referrer to vouch for you. A name is enough. You are borrowing a little familiarity, and nobody expects the referrer to put their reputation behind it.

**The dead end**

- Thanks for letting me know. Have a great day!
- No problem, sorry for the bother.

**The referral bridge**

- Thanks for the heads up. Who usually handles partner onboarding at Acme?
- Understood. Is the person who owns vendor onboarding on your team or elsewhere?

## The referral request framework

The goal is a name with as little effort from them as possible. If your reply reads like a request to map their org chart, it stays unread. Give them the outcome you deliver and they can slot it into a department in one second.

Keep the whole reply to two sentences. You are asking a small favour from someone who just told you they are busy with something else, and length is the fastest way to look like you didn't read their answer.

Don't ask who you should talk to in the abstract. Naming the problem does the sorting for them. Who handles partner onboarding is an easier question to answer than who handles operations, because the first one has a department attached to it.

Give them an easy out at the end. Something like if that's not your area, no worries keeps the ask light, and a light ask is the kind people actually answer.

1. **Acknowledge the reply.** Confirm you heard them in the first few words so they don't have to repeat themselves. One line is enough.
2. **Name the outcome you deliver.** Say the thing you actually fix, in their language. Reducing chargebacks, onboarding partners, cutting invoice errors. Use their words for the problem rather than your product category.
3. **Ask for a name or a role.** Either works. A name is better because you can search it. A role tells you which department to look in when they don't want to name anyone.
4. **Stop typing.** Two sentences with no links, attachments or calendar link. The ask is small and it should look small.

## Examples of referral scripts

Match the tone of their reply. A two word brush off gets a two sentence answer. A friendly note that explains why they can't help gets a slightly warmer one.

Avoid stacking apologies. One thanks for the heads up is enough. Two apologies make the exchange about your discomfort instead of their time.

If they gave a reason, use it. Someone who says they moved to a different team has just told you where they used to sit, and that is often where the budget still lives.

Don't send a second message if they ignore your referral ask. They already answered once. Asking again reads as pressure and costs you the name.

- **them:** I'm not the right person for this.
- **you:** Thanks for the heads up. Who usually handles partner onboarding at Acme?
- **them:** That would be Sarah Jenkins, our Head of Growth.
- **you:** Thanks, I'll reach out to her.
- **draft:** Hi Sarah, Daniel on your team pointed me your way when I asked who handles partner onboarding. Worth a quick call this week?

```
Direct: Thanks for the heads up. Who usually handles partner onboarding at Acme?

Softer: No problem at all. Is there someone else on your team who owns vendor onboarding?

Specific: Understood. I'm looking for whoever owns partner onboarding. Would that be the Head of Ops or someone else?

With a reason given: Makes sense. Were you handling onboarding before the move, or should I ask someone on that team?
```

## How to reach out to the new contact

Once you have a name, the next message writes itself. You are not a stranger in that inbox anymore. Someone in their company sent you.

Send it the same day. Referrals go stale fast, and if the referrer mentions your name in passing before your message arrives, it lands better than if you wait a week and the introduction has to be explained again.

If the referrer warned you the person is hard to reach, say so in the message. Daniel mentioned you're swamped gives them permission to answer briefly, and a brief answer is all you need.

1. **Open with the referrer's name.** First line, full name, no preamble. Daniel sent me, or Daniel on your team pointed me your way.
2. **Say what you were asking about.** Repeat the topic you asked the referrer about. It proves the handoff was real and tells them which part of their job this touches.
3. **Give one line of proof.** One sentence on what you do for companies like theirs. Keep it short.
4. **Ask for something small.** A 10 minute call, or a yes or no on whether this is their problem this quarter. Small asks get answers.

- **you:** Hi Sarah, Daniel on your team pointed me your way when I asked who handles partner onboarding. We help agencies get partner paperwork out of spreadsheets. Is that on your plate this quarter?
- **them:** It is. Daniel mentioned you might reach out. What does the setup look like?
- **you:** Two weeks to import your current partners, then onboarding runs from one board. I can walk you through it on Thursday if that works.

> Never ask the new contact for another referral. If they aren't the buyer either, you have used up your one handoff and the next ask sounds like a loop.

## Handling the I don't know response

Sometimes people genuinely don't know. Large companies split teams by product line, and someone in finance has no idea who runs partner marketing.

When that happens, stop. Asking twice reads as not listening, and you spend whatever goodwill you had.

There is a second version of this reply that is really a brush off. If a senior person says they aren't sure, they usually mean they don't want to be the one to decide. Treat it the same way and move on without a follow up question.

Keep a note of who said no and why. If two people at the same company point at the same team, that is your buyer. If nobody will name anyone, the account probably isn't worth more messages this quarter.

1. **Close the loop.** One line. Thanks, I'll take a look at the team page. Then leave the thread alone.
2. **Search the company by role.** Open the company page on LinkedIn, use the People tab and filter by title keywords for your buyer. Read three profiles before you pick one.
3. **Message the new person without the referral.** You don't have a name to drop, so lead with the problem instead. Keep it shorter than usual because you have no context to lean on.

## When they offer to forward your note

Some people would rather pass your message along than name a colleague. That is still useful, but it puts your words in someone else's hands with no control over timing or framing.

Say yes, then make forwarding easy. Write three lines they can paste without editing, and ask them to copy you so you know it landed.

If nothing comes back in a week, reply once to the original person asking whether it went anywhere. Do that once and leave it.

**What they can't forward**

- A 200 word paragraph with two links, an attachment and a calendar link.
- A question that needs an answer before it makes sense.

**What they can paste**

- Three lines: who you are, the problem, the ask.
- One link at the end, marked optional.

## Doing this with Kinlead

Kinlead sends outreach from your own LinkedIn account and handles replies according to the mode you pick for each campaign. Set a campaign to hand the conversation to you at the first reply if you want to write every referral request yourself. Or let the AI reply until there is real interest and take over once someone engages.

Every reply from every campaign lands in one inbox sorted by intent, so a not the right person note sits next to the interested ones instead of disappearing into a thread. You can see how the reply modes work and book a walkthrough at [book a demo](/demo).

## Related

- [Book a demo](https://getkinlead.com/demo.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)
- [Unified inbox](https://getkinlead.com/features/unified-inbox.md)

## Common questions

**Should I ask for an email address or just a name?**

Ask for the name. People are protective of their colleagues' email addresses and may refuse to give them. A name lets you find the person on LinkedIn and keep the conversation on the platform.

**How long should I wait before messaging the referred person?**

Do it the same day. The referral is freshest in everyone's mind shortly after the first person gives you the name.

**What if the person refers me to a general info@ email?**

Treat that as a dead end. General inboxes are rarely read by decision makers. Go back to the LinkedIn People tab and find a specific person.

**What if they say they aren't the right person but keep asking about the product?**

Answer their question in one line, then ask for the name again. Curiosity plus a question usually means they can influence the decision even if they don't own the budget.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
