# How to message a prospect after a lost deal
> Learn how to follow up with lost prospects on LinkedIn using low-pressure check-ins that target the gap between a competitor's promise and their delivery.
- HTML: https://getkinlead.com/linkedin-messages-for-lost-deals
- Markdown: https://getkinlead.com/linkedin-messages-for-lost-deals.md

**Short answer:** Wait until the new vendor's setup phase is underway, then send a short message asking whether the specific problem they hired that vendor to fix is actually gone. Don't ask for the business back in the first message.

## When to reach back out

It's easy to let a lost deal sit. The contract gets signed somewhere else, the stage flips to closed lost, and nobody looks at it again until renewal season. By then the buyer has either settled in or is too worn down by the switch to consider another one.

The better window is earlier, while the new tool is still being set up. That's when the gap between the sales demo and the daily reality shows up. Ask whether the problem they hired the other vendor to fix is actually gone. Don't ask for the business back.

Pick the moment from what they told you during the deal. If implementation speed was the thing they cared about, check in around the time implementation should be finishing. If reporting was the thing, wait until their first quarter close.

If you never got a clear reason for the loss, ask. A short message to the person who ran the evaluation often gets a straight answer months later, and that answer tells you which window to use.

| | When | What you're checking | What to say |
| --- | --- | --- | --- |
| 30 days in | Whether setup is going as smoothly as the demo suggested | Ask if the tool is where they expected it to be by now |
| 90 days in | Whether the main pain point is still there | Ask if the manual work has crept back in |
| 6 months in | Whether the attention they got during the sale has dropped off | Ask who they go to now when something breaks |
| A month before renewal | Whether they're reviewing the contract | Ask if they're looking at alternatives this cycle |

## The low-pressure framework

You're writing from behind. They already picked someone else, and a pushy message just confirms the choice. So the message shouldn't ask for a meeting, a demo or a call. It should ask about their current state.

Name the specific problem they had. Say what usually happens after a fix like that. Then ask one question about whether it's holding. No pitch and no calendar link.

Keep it to two or three sentences. Long messages read like a proposal, and a proposal is the thing they already turned down.

**Pushy or vague**

- I'm checking in to see if you're unhappy with the other vendor yet.
- Do you have any updates on your needs for this quarter?
- Just wondering if you've reconsidered our proposal from last year.

**Specific and low pressure**

- I remember manual data entry was eating your team's Fridays. Is that actually solved now, or has it crept back?
- The first 90 days of a setup like that are usually the roughest. Is the tool doing what you hoped for your routing?
- We rebuilt the reporting piece we talked about. Not sure it's relevant anymore, but happy to send the two-minute version if it is.

## Message templates for different scenarios

Write around the pain point they described during the original deal, not around your product. If you can quote their own words back to them, do it.

These three cover the common cases. Change the bracketed parts to what actually happened.

The exchange further down is what a good one looks like. The first message doesn't mention your product at all, and the second one only offers something after the buyer admits a gap.

- **you:** Hi Sarah, you went with Acme back in March. Setups like that usually take longer than the demo suggests. Is yours where you expected it to be by now?
- **them:** Not really. We're still routing leads by hand three months in.
- **you:** That gap shows up when the routing rules have to be rebuilt from scratch. If it's useful, I can show you how we handle it without the rebuild. No pressure either way.

```
Template 1: the problem came back

Hi [Name], we spoke last year about [specific problem]. Fixes like that usually hold for a few months before the manual work creeps back in. Is it still under control, or is it a headache again?

Template 2: the setup is dragging

Hi [Name], you went with [vendor] back in [month]. Setups like that often take longer than the demo suggests. Is yours where you expected it to be by now?

Template 3: the team changed

Hi [Name], I worked with [previous person] on [project] before they moved on. You've inherited [tool] since then. Curious whether it fits how your team works now, or whether you're stuck with it.
```

## What to write when you're not connected yet

If the deal ended without a connection, you get one note, and LinkedIn caps connection notes under 200 characters. That's roughly two sentences, so every word has to carry.

Don't spend the note reintroducing yourself or your company. Spend it showing you remember their situation. A note that could have been sent to anyone gets ignored.

**Generic note**

- Hi Sarah, I'd like to connect and stay in touch about future opportunities.
- Hi Sarah, I saw you're a VP of Sales and thought we should connect.

**Note that proves you remember**

- Hi Sarah, we spoke in March about lead routing. Curious how the new setup is holding up. Happy to compare notes.
- Hi Sarah, you mentioned manual routing was costing your team a day a week. Did the new tool fix that?

## Handling the response

Replies land in a few buckets, and each needs a different move. None of them involve listing features or arguing with the choice they made.

The one thing that loses the deal permanently is gloating. If they admit the other tool isn't working, don't say you told them so. Ask one more question and let them get there themselves.

Speed matters less than you'd think. The buyer is mid-implementation and busy. Answering within a day is fine.

| | What they say | What it means | Your next move |
| --- | --- | --- | --- |
| It's going fine | They're not ready to talk, and pushing now costs you the relationship | Say you're glad, ask about one specific gap, then ask to check in before renewal |
| We're still setting it up | The window is open | Ask what's taking the longest and offer to compare notes. No demo yet |
| Honestly it's not working | They're already thinking about switching | Ask what they'd need to see to consider a change, then send one thing |
| No reply | The timing is wrong or the message missed | Wait, then try a different angle once. Two follow-ups at most |

> Never criticise the competitor by name. Describe the limitation in the process or the setup, not the company.

## Staying in their orbit until renewal

Most lost deals don't come back on the first message. They come back when something breaks, and the person who stayed in touch politely is the one who gets the call.

That means a light touch every few months with something useful: a change in your product that touches their problem, or a question about how their team handles something.

Keep a note of what they said when they turned you down. The reason they gave is usually the thing that eventually breaks, and quoting it back six months later shows you were listening.

1. **Put the renewal date in your calendar.** Ask when the contract renews, or estimate from when they signed. Set a reminder for three months before.
2. **Write down the specific gap.** Note the one thing you know the other tool handles badly. That's the thread you pull when you come back.
3. **Send something useful every quarter.** One short message with something they can use, no ask attached. A couple of sentences is enough.
4. **Reopen the conversation before renewal.** Three months out, ask whether they're reviewing the contract. That's when switching is a real option rather than a hassle.

## Doing this with Kinlead

You can keep lost deals in a lead group by importing a CSV of LinkedIn profile URLs, then point a campaign at that group. A [sales playbook](/ai-sales-playbook-for-linkedin-outreach) sets the tone so the messages stay low pressure instead of turning into a pitch.

Set the campaign to hand the conversation to you at the first reply. Lost deals need judgement, and you want to read the answer yourself. Queued messages can be read and edited on the Actions page before they send, which is where you check that the pain point in the message is the one they actually described.

## Related

- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [AI sales playbook for LinkedIn](https://getkinlead.com/ai-sales-playbook-for-linkedin-outreach.md)
- [Unified inbox](https://getkinlead.com/features/unified-inbox.md)

## Common questions

**Should I apologise for losing the deal first?**

No. An apology makes the conversation about your failure. Keep it on whether their current setup is working.

**Is it better to send a connection request or a direct message?**

If you're already connected, send a direct message. If not, a connection request with a short note about the problem you discussed beats a blank request.

**What if the person who bought the competitor's tool has left the company?**

Reach out to whoever took the role and ask how the current tool fits their workflow. A new person has no loyalty to a decision they didn't make.

**How many times should I follow up?**

Twice at most on the first attempt. If neither gets an answer, wait until the renewal window and try a different angle.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
