# How to message a referral on LinkedIn
> Learn how to write a LinkedIn message to a referral that gets a reply. Put the mutual contact first, give a real reason, and keep the ask small.
- HTML: https://getkinlead.com/linkedin-messaging-for-warm-referrals
- Markdown: https://getkinlead.com/linkedin-messaging-for-warm-referrals.md

**Short answer:** To message a referral on LinkedIn, name the mutual contact in your first sentence and add the one specific detail they gave you. Say in a line why your name came up, then end with a small ask, usually a reply rather than a meeting. The whole message should fit in three or four sentences.

## The mistake that kills referrals

Most people treat a referral as permission to run their usual cold pitch with a name attached. The mutual contact becomes an opening line, then the message slides into a product description and a request for fifteen minutes. The person reading it agreed to hear from you because someone they trust vouched for them. They did not agree to a product tour.

The damage goes past this one message. When the pitch lands, the recipient stops replying and tells the mutual contact you came on strong. That contact becomes more careful about introducing you to anyone else, and you'll never know it happened.

A referral is a transfer of trust. Your first message has one job: show the recipient that you understood why the handoff happened, then leave the decision to them. The rest of this guide is detail on how to do that.

**Cold pitch with a name attached**

- Hi Sarah, Mark suggested I reach out. I help companies scale revenue with AI. Do you have 15 minutes?
- Hi Sarah, I'm a friend of Mark's. We provide market-leading growth solutions. I'd love to show you a demo.

**Referral message**

- Hi Sarah, Mark said you're moving billing off the legacy system this quarter. I did that migration at Northwind last year and invoice history was the part that bit us. Happy to share what I'd avoid.
- Hi Sarah, Mark and I were talking about your EMEA rollout. He thought my work getting Northwind through the same compliance review might be useful. Want the two-page version?

## Get one detail from your contact first

You can't write a bridge sentence from 'you two should meet'. Ask the person who referred you for one concrete thing: what the other person is working on, what broke, what they're planning, or what they asked about. One line back is enough to write a specific message.

Ask it as a quick reply, not a formal request. People answer in two lines when the question is easy, and they ignore a paragraph that feels like homework.

- A deadline they mentioned ('before the Q3 renewal')
- A problem with an actual name ('invoice history is a mess')
- A decision already made ('they picked the vendor, now they need buy-in')
- A person they have to convince ('her CFO wants the numbers')

```
Hey Mark, thanks for the intro to Sarah. One thing before I write to her: is she mainly trying to cut cloud spend, or is the priority getting the EMEA rollout through compliance? I don't want to open with the wrong problem.
```

## Build the bridge sentence

The bridge sentence does one job: it explains why this person, this week, would get something out of talking to you. It goes in the first two lines, before anything about your company or your title.

Strong bridges use the detail you collected. Weak ones restate the introduction, which the recipient already knows, and then ask for time.

1. **Open with their situation.** Use their words. 'Mark said you're moving billing in Q3' works. 'Mark said you're looking at solutions' does not, because it's the same line every seller sends.
2. **Say why your name came up.** One line on the work that made your contact think of you: a result, a project, a problem you already solved at a company like theirs. A job title tells them nothing.
3. **Make the ask small.** Ask for a reply, not a meeting. 'Want me to send the write-up?' can be answered in three seconds. 'Do you have 30 minutes this week?' needs a calendar and gets ignored.

## Templates for the three referral types

Match the wording to how the introduction happened. The three versions below cover most cases, and each one ends with something a person can answer from their phone.

The detail in brackets is the only part that matters. Swap in what your contact actually told you and take out the template feel: no 'I hope this finds you well', no paragraph about your company.

| | Situation | What to write |
| --- | --- | --- |
| Direct introduction | Hi Sarah, Mark introduced us and said you're moving billing off the legacy system this quarter. I did the same migration at Northwind last year and invoice history was the part that bit us. Happy to share what I'd avoid. Worth a look? |
| Soft mention | Hi Sarah, I was on a call with Mark yesterday and your name came up around the EMEA compliance question. I spent most of last year on that at a 40-person agency and wrote up what worked. Want me to send it over? |
| You're asking for their help | Hi Sarah, Mark said you ran the pricing change at Acme. I'm working through the same decision at Northwind and would value ten minutes of your experience. I'm not selling anything, I want to hear how it landed. |

## Connection note or open message?

If you aren't connected yet, the note on your connection request is the only place the referral can go. LinkedIn gives you very little room there, so pick the single detail that makes the reason obvious and cut everything else. 'Mark suggested we connect, he said you're moving billing in Q3' fits and does more work than a full paragraph.

If you're already connected, send it as a message. Same first line, more room, and you can attach the write-up or name a specific day.

In both cases, don't ask for a call in the same sentence where you name the referral. Give the reason, then the small ask, then stop.

> The first line of a referral message should make sense to someone who has never heard of you or your product. If it only makes sense after a paragraph of context, the context is doing the job the referral should be doing.

## What to do when they reply

Replies come in three shapes: yes, later, and a question. Answer the question first, because that keeps the thread alive at the lowest cost to them. If they name a day, confirm it in the same reply instead of sending a scheduling link and waiting.

When the answer is yes, spend your next message on what the conversation will cover. Three bullets is plenty, and it tells them they aren't walking into a demo with no exit.

- **you:** Hi Sarah, Mark introduced us and said you're moving billing off the legacy system this quarter. I did the same migration at Northwind last year and invoice history was the part that bit us. Happy to share what I'd avoid. Worth a look?
- **them:** Worth a look, but I'm buried until Thursday. What are you proposing?
- **you:** Fair. I can send the two-page write-up today, or we take 20 minutes Friday and I walk you through the invoice history problem. Friday is probably faster for you.
- **them:** Friday works. 9:30?

## When the referral goes quiet

One follow-up is expected. Two is the limit. The second message should add something rather than repeat the first: the write-up you mentioned, a note that the timing might be wrong, or a question with a yes or no answer.

After that, tell the mutual contact what happened in one line, without turning it into a problem they have to solve. 'I reached out to Sarah twice and didn't hear back, so I'll leave it with her. Thanks for the intro.' They can nudge her if they want to, and you haven't put them in an awkward spot.

If they reply in three weeks instead of three days, answer the same way you would have on day one. Referrals go cold because the sender got offended by the delay, not because the lead lost interest.

> Stop after two messages to the person you were referred to. Every extra one costs your contact credibility, and they'll remember it the next time someone asks them for an introduction.

## Doing this with Kinlead

Working through a batch of introductions gets heavy on bookkeeping: who introduced whom, what the specific detail was, which thread is still open. Kinlead keeps those people in a lead group, and you can import them from a CSV of LinkedIn profile URLs so the referrals you already have sit next to the leads you find later.

A connection request note is written from the campaign's goal and your own [sales playbook](/ai-sales-playbook-for-linkedin-outreach), the script you already use, and it opens with why that person became a lead. Notes run under 200 characters, which forces the same discipline as the bridge sentence. Queued messages can be read and edited on the Actions page before they send.

If you want to handle referred contacts yourself, set the campaign to hand over at the first reply. Replies from every campaign land in the [unified inbox](/features/unified-inbox), classified by intent, and you get an email when someone answers.

## Related

- [AI LinkedIn connection request templates](https://getkinlead.com/ai-linkedin-connection-request-templates.md)
- [AI sales playbook for LinkedIn outreach](https://getkinlead.com/ai-sales-playbook-for-linkedin-outreach.md)
- [How to ask for a referral to the right person](https://getkinlead.com/ask-for-referral-to-right-person.md)

## Common questions

**Should I mention the referral in the connection request or the first message?**

Put it in the connection request if you aren't connected yet. They recognize the name immediately, which is most of the reason they accept. If you're already connected, lead with it in the message.

**What if my contact didn't give me a specific reason for the introduction?**

Ask them for one before you write, even if it's a single sentence. If they genuinely don't have one, use the version where you ask for the person's experience and keep the ask small.

**How do I tell the mutual contact the lead never replied?**

Keep it to one line and give them an easy exit. Say you reached out twice and will leave it with them, then thank them for the introduction. Don't ask them to chase it.

**How long should I wait before the follow-up?**

Three to five business days is enough for most people to see a message and decide. Wait longer if you know they're traveling or mid-quarter, and don't send a second follow-up after that.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
