# Checklist before adding more LinkedIn accounts
> A checklist for profile completeness, account warmth and security settings before you add another LinkedIn account to your small outbound team.
- HTML: https://getkinlead.com/linkedin-outreach-checklist-before-scaling-accounts
- Markdown: https://getkinlead.com/linkedin-outreach-checklist-before-scaling-accounts.md

**Short answer:** Before adding LinkedIn accounts to a sales team, check each profile for a real photo, a specific headline, a filled About section and work history. Then confirm the account has recent human activity, security settings are on, and outreach limits are set per account rather than per team. Profiles that look like placeholders get reported, and reports are what lead to restrictions.

## Audit the profile before you hand out the login

A half-finished profile is the first thing that gets an account into trouble. Leads report requests from blank profiles, and enough reports move an account toward a restriction. It also wastes the invite, because nobody accepts a stranger with no photo and a headline that says Sales Manager.

Run this check on every account you plan to add, including the ones you're about to give to a new hire. It takes ten minutes and saves the awkward week where the account is limited and nobody knows why.

The test is simple. Would a stranger looking at this profile for ten seconds know what this person sells and who they sell it to?

1. **Photo and banner.** Use a headshot with a plain background and a face you can actually see. Put a banner that names the product or the customer. If the only banner you have is a stock cityscape, leave the space empty rather than fill it with something generic.
2. **Headline that names the buyer.** Helping 40-person agencies turn one service line into a retainer does more work than CEO at Acme. Keep it under the character limit and drop the emoji and the pipe symbols.
3. **About section in first person.** Three short paragraphs: what the person does, who they do it for, how to reach them. Skip the mission statement and the list of values.
4. **Work history with dates.** Current role with a start date, plus two or three earlier roles. An account with one entry and no dates looks created last week, because it probably was.
5. **One pinned post or link.** Pin a post that shows how the person thinks about the problem they sell into, or a link to a case study. It gives the lead something to read after they open the profile.

- **you:** Hi Sarah, saw your comment on the agency pricing thread. We help agencies turn one service line into a retainer. Open to a quick call?
- **them:** Do I know you? Your profile doesn't say where you work or what you do.
- **draft:** The message wasn't the problem. Fix the profile first, then send the same note next week.

## Check whether the account is actually warm

Age is not warmth. An account created in 2019 that hasn't been touched since 2022 behaves like a brand new one, because from the platform's side nothing has happened on it for years.

Warmth is recent, human activity. Logging in, reading the feed, commenting on posts in your buyer's niche, accepting a few invites, publishing something. Give a dormant or new account a couple of weeks of that before a campaign touches it, and give the owner a reason to log in daily.

If the account belongs to a new hire who has never used LinkedIn for work, don't drop it into a campaign in their first week. Have them post once, comment a few times, and send a handful of invites to people they already know.

**Accounts that get flagged**

- A new hire's account added to a campaign on the day it was created
- An account with no posts or comments in a year going straight to connection requests
- A profile that only sends invites and never replies to anyone who accepts

**Accounts that survive it**

- The new hire posts twice and comments on five posts in their buyer's space before the first campaign
- The dormant account gets updated, logged into daily for a week, then sends a small batch of manual invites
- The owner answers every accepted invite themselves for the first week so the replies sound like a person

## Fix the settings that quietly cost you invites

Security settings are not about passing a test. They decide whether you can get back into an account after something goes wrong, and whether a lead can read the profile before deciding to accept.

Visibility matters more than people think. If the profile is private, the lead sees a name and a blank page. That invite gets ignored, and ignored invites pile up.

Then check the boring things: the recovery address on file, the phone number, the device the owner normally uses. An account that logs in from an unfamiliar network looks odd before it sends a single request.

1. **Turn on two-factor authentication.** Use an authenticator app rather than SMS where the account offers it. Store the backup codes somewhere the owner and the admin can both reach.
2. **Set the profile to public.** Open the profile in a private browser window while logged out. If you see a lock or a stub page, the visibility setting needs changing.
3. **Verify and add a recovery email.** Confirm the primary address and add a second one you control. This is the only reliable way back in if the account gets locked.
4. **Cut the group invite noise.** Turn off the setting that lets anyone add the account to groups. It removes a stream of junk notifications that bury real replies.
5. **Keep logins boring.** Same laptop, same network, same browser profile as the owner uses day to day. Don't test a new account from a shared VPN the day before launch.

> Verify the email and add a recovery address before the account touches any tool. A lockout with no recovery path costs you the account and everything built on it.

## Set volume per account, not per team

LinkedIn doesn't publish exact limits on invites or messages, and any number someone quotes is a guess based on their own account. Treat limits as something each account reveals over time rather than something you set once for the whole team.

Start below what the account has recently handled, hold it steady for two weeks, then nudge it up if acceptance stays normal. When acceptance drops or LinkedIn shows a warning, go back down and stay there. A five-year-old account with steady activity will carry more than one created last month, but only if you prove it gradually.

Write the current number next to each account and review it weekly. Two people sending from two accounts should not be sharing one team target, because the accounts don't share the same tolerance.

| | Account age | Invite pace | Message pace |
| --- | --- | --- | --- |
| Under 3 months | Start below what the account handled in a normal week, then add one request at a time | Reply to inbound only until invites are being accepted reliably |
| 3 to 12 months | Hold a steady daily number for two weeks before you raise it | One follow-up after an accepted invite, written by the owner |
| Over a year | Run at the level the account has held for the last month | Full sequence with one or two follow-ups, still capped by the send window |

## Decide who owns the login

Most account problems on a sales team are ownership problems. Two people share a password, someone leaves, and the account becomes a profile nobody can recover and nobody wants to delete.

Sort this before you add an account, not after.

- One person per account, with their own login. Shared passwords break the recovery flow and make restrictions harder to clear.
- The owner keeps the recovery email and phone. If the company controls the recovery address but not the login, you lose the account the day the person leaves.
- The admin owns billing and seat assignment, not the passwords. Keep it that way so the admin isn't the single point of failure for every account.
- Write down which workspace each account sends from, so two people don't message the same lead from different profiles.
- Remove the seat the same day someone leaves. A connected account sitting behind an ex-employee's login is a problem waiting for a Monday.

## What to do when an account gets restricted

Restrictions happen, even to accounts that follow every rule. The recovery depends on how fast you stop, not on how cleverly you work around it.

The first move is to stop all sending from that account. No invites, no messages, no queued actions. Then have the owner log in from their normal device and follow the on-screen verification, usually a code to the recovery email or phone.

Don't create a replacement account to keep the campaign going. A fresh profile with no history is more likely to hit the same wall, and you've lost the connections on the restricted one.

```
Pausing outreach on [name]'s account until [date].
Reason: [restriction notice / warning email / acceptance rate fell below our line].
Nobody sends from this profile and no campaigns point at it.
[name] logs in from their usual laptop only, no new devices.
We review on [date] and restart at a lower volume.
```

## Doing this with Kinlead

Kinlead runs outreach from the accounts your team already has, inside the limits you set. Each account sends at most one action every 5 minutes, and campaigns stay within daily invite and message limits and a send window in the lead's time zone. That pacing is the same guardrail you'd apply by hand, except it holds when nobody is watching.

A Pro admin invites teammates by email. Each teammate signs in with their own login, opens the workspaces they were given, and connects their own LinkedIn through a third-party provider, so Kinlead never stores a LinkedIn password. The admin pays for every seat, priced like an extra LinkedIn account. Removing a teammate ends their access and disconnects the LinkedIn they connected, which keeps the ownership rules above from slipping.

Settings shows pending invitations and acceptance rate with warnings when either looks off, and stale pending invites are withdrawn automatically. When LinkedIn pushes back on an account, Kinlead pauses invites on that account and emails you. It does not warm up an account for you, and it can't promise an account won't be restricted, so the profile and warmth checks still decide whether an account should be added at all.

## Related

- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)
- [Campaigns and send windows](https://getkinlead.com/features/campaigns-and-send-windows.md)
- [Shared workspaces for teams](https://getkinlead.com/features/workspace.md)
- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)

## Common questions

**How do I know if an account is too cold to start outbound?**

If it has no photo, a one-line About section, and no posts or comments in months, it's cold. Give it a couple of weeks of daily logins and real comments before any invites go out.

**What happens if a teammate's account gets restricted?**

Stop all sending from that account immediately and have the owner complete the verification LinkedIn asks for. When it lifts, restart below the previous volume and watch acceptance for two weeks.

**Do I need Sales Navigator for every account I add?**

No. You can find and contact people using standard LinkedIn search, so a Sales Navigator seat isn't required to run outbound. Extra seats add cost without changing the profile and warmth checks above.

**How many accounts can one team run?**

As many as each person can own properly, which is usually one per sender. Kinlead Pro includes one LinkedIn account and one user, and extra accounts cost $40 a month each, less per account in larger numbers.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
