# How to let an agency run LinkedIn outbound safely
> Give an agency access to your LinkedIn outbound without sharing your password. Set limits, send windows and a review process that keep the account healthy.
- HTML: https://getkinlead.com/manage-linkedin-limits-with-agency-partners
- Markdown: https://getkinlead.com/manage-linkedin-limits-with-agency-partners.md

**Short answer:** Don't hand over your LinkedIn password. Connect the agency through a third-party provider that authorizes the session, then set activity caps, send windows and a weekly review so you can see and stop anything that looks wrong.

## Why password sharing breaks the account

An agency that asks for your email and password is asking you to hand over the account. The moment someone signs in from another city, LinkedIn sees a new device and a new network. That can trigger a verification check, a temporary lock or a restriction that takes days to clear.

You also lose the ability to tell what changed. Someone with your password can edit your headline, add a second email, accept invitations or send messages that don't sound like you. By the time you notice, the damage is in front of your buyers.

Password sharing makes ending the contract messy. You have to change the password, end every active session and hope the agency didn't keep a copy. A session bridge avoids that conversation.

**Password sharing**

- Agency logs in from a remote server in another country
- LinkedIn shows a new login alert
- Account is locked for verification
- You read out two-factor codes to the agency

**Session bridge access**

- Agency connects through a third-party provider
- Your password stays with you
- The session stays tied to your known device
- Access can be revoked in settings

## How to set up access without giving up your login

The setup you want is a session bridge. The agency's tool connects to LinkedIn through a third-party provider, and you authorize that connection in your own browser. Your password stays with you. The provider holds a session token that you can revoke.

Ask the agency to walk you through the connection live. Don't accept a screen recording. You want to see which account is being connected, which workspace gets access and what the tool can do after the connection is live.

1. **Choose a tool with a third-party provider.** Confirm the agency uses a tool that connects through a provider rather than asking for your password.
2. **Authorize the session yourself.** Use your own browser so the session is tied to your known device and network.
3. **Assign a workspace.** Grant the agency access to the specific workspace where your campaigns will run.
4. **Check what the agency cannot do.** Make sure the agency can send outreach and read replies but cannot change your password, email or account security settings.

```
Access brief for the agency

Tool: [tool name]
Provider: [third-party provider name]
Account: [your LinkedIn profile URL]
Workspace: [workspace name]
Allowed: send invites, send messages, read replies
Not allowed: change password, change email, add admins
Review: [day] at [time]
```

## Set activity caps the agency cannot change

LinkedIn does not publish exact limits for invites, messages or profile views. Anyone who quotes a precise number is guessing. What you can control is the shape of the activity: steady, spaced out and inside a cap you set.

Put the cap in the tool, not in a spreadsheet. If the agency can raise the cap without asking, it will happen on a busy week. Set a daily invite limit and a daily message limit that you are comfortable defending if LinkedIn asks.

Watch the first two weeks closely. Start lower than you think you need, then raise the cap only after you see replies and no warnings. A new agency should expect a slow start.

| | Action | What to set | Why it matters |
| --- | --- | --- | --- |
| Connection requests | A daily cap you set in the tool | A burst of requests in one hour looks automated |
| Messages | Spaced out through the day | Back-to-back messages look like a bot |
| Follow-ups | Only after a reply or a set delay | Too many follow-ups get you reported |
| Profile views | Keep them proportional to your invites | Excessive views look like scraping |

> If the agency cannot show you the cap inside the tool, they are not ready to run the account.

## Match send times to the lead's time zone

Timing is part of safety. A message that lands at an odd hour local time looks automated, and a lead is more likely to hit report or block. That report is what actually gets accounts restricted.

Set a send window in the lead's time zone, not the agency's. If the agency is in another country, their 9 AM is your buyer's midnight. The tool should hold the message until the lead's business hours, not send it when the agency clicks go.

Use a narrower window for first messages and a wider one for follow-ups. People check LinkedIn during lunch and after dinner. A window from early morning to late evening is fine for follow-ups, but first touches should land when a reply is likely.

- **them:** It's 2:40am here. Who is this?
- **you:** Sorry about the hour. I'm with Acme. I'll follow up tomorrow during your workday.
- **draft:** Hi Dana, I saw your post about hiring SDRs. Worth a quick chat next week?

## Keep the pending invitation pool clean

Pending invitations pile up when an agency sends requests and never checks what happened. A large pool of ignored invites makes the account look careless. It also leaves less room for new requests.

You need a weekly cleanup. Decide how long an invite should sit before you withdraw it. A few weeks is reasonable for most B2B sales. If the lead has not accepted, the message is cold anyway.

Don't withdraw everything at once. Spread the cleanup across the week so the account doesn't look like it is clearing house in one burst.

1. **Export the pending list.** Pull the list of sent invitations that have not been accepted.
2. **Mark invites older than your cutoff.** Use the age you agreed with the agency, not the agency's default.
3. **Withdraw in small batches.** Clear a few each day instead of hundreds in one sitting.
4. **Log the reason.** Note the date and the cutoff so you can show the cleanup was deliberate.

## Review the work weekly without micromanaging

You don't need to approve every message. You do need to see the pattern. Once a week, read the last twenty messages the agency sent, the replies they got and the invites that are still pending.

Look for messages that don't sound like you, replies that mention odd timing, and a pending count that keeps rising. Those are early warnings. Fix them before they become a restriction.

Ask the agency for a simple report: invites sent, messages sent, replies, meetings booked and any LinkedIn warnings. If they can't produce that, you can't manage the risk.

**Weak weekly review**

- Agency sends a screenshot of the dashboard
- You scan the numbers once
- No one reads the actual messages
- Pending invites are ignored

**Strong weekly review**

- You read ten sent messages and five replies
- You check the send window against lead time zones
- You compare pending invites week over week
- You ask for the warning log

## Doing this with Kinlead

Kinlead connects to your LinkedIn account through Unipile, a third-party LinkedIn provider, and never stores your password. Outreach runs from your own account at a human pace: each account sends at most one action every 5 minutes, inside daily invite and message limits you set and inside a send window in the lead's time zone.

Stale pending invitations are withdrawn automatically, and Settings shows pending invitations and acceptance rate with warnings. If LinkedIn pushes back on an account, Kinlead pauses invites on that account and emails you. The account safety settings are described on [LinkedIn account safety](/features/linkedin-account-safety).

## Related

- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)
- [Campaigns and send windows](https://getkinlead.com/features/campaigns-and-send-windows.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)

## Common questions

**Does using a third-party provider guarantee my account won't be restricted?**

No. It removes the risk of a new login from an unknown device, but LinkedIn can still restrict an account for sending too fast or for reports from recipients.

**Can I change my password after the agency connects?**

Usually. The connection uses a session token, not your password. If changing the password breaks the session, you will need to reconnect the tool. Plan for that during a quiet period.

**How do I know if the agency is sending too many messages?**

Check your sent folder and the tool's activity log against the cap you set. If the cap is not visible in the tool, ask for a written limit and a weekly report.

**What should be in the agency contract?**

Name the tool, the provider, the daily caps, the send window and the offboarding step. Require a weekly report and a warning log. Make clear that the agency cannot change account security settings.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
