# How to manage shared LinkedIn workspaces for teams
> How to give SDRs access to shared LinkedIn lead lists and workspaces without sharing passwords, plus how to assign groups and check account health.
- HTML: https://getkinlead.com/manage-shared-workspaces-for-sdr-teams
- Markdown: https://getkinlead.com/manage-shared-workspaces-for-sdr-teams.md

**Short answer:** To give an SDR team access to LinkedIn lead lists without sharing passwords, set up one login per person and put leads into named groups inside shared workspaces. An admin assigns each teammate to the workspaces they need, so nobody sees lists they are not working.

## The risk of shared logins

Founders often start by giving their first SDR the password to their own LinkedIn account. LinkedIn watches login patterns. When one account signs in from several cities or devices in a short time, it can ask for a check or limit what the account can do. You cannot prove the activity is yours.

Shared logins also leave you without a clear trail. You cannot tell which teammate sent a message or who changed a campaign. If someone sends a weak message to a good prospect, you have no way to see it before the next batch goes out.

Use one login per person and one LinkedIn account per login. A password manager hides who did what. It does not give each person a separate account.

**Shared password**

- Several people sign in to the same account
- No record of who sent which message
- One mistake can affect the founder's main account

**One login per person**

- Each teammate signs in with their own email
- The admin sees who owns each workspace
- A problem on one account does not lock out the team

> If two people need to work the same leads, give them separate accounts and separate lead groups. Do not pass one login around.

## Sort leads into groups before anyone logs in

A list of 1,000 mixed leads is hard to work. The SDR has to guess why each person is a fit, so the first message turns generic. Sort the list by the reason you found the person: industry, role, company size, or a post they commented on.

Name each group so a teammate can open it and know what to send. 'Enterprise tech North America' tells the SDR to use the enterprise script and mention regional examples. 'Leads' tells them nothing.

1. **Pick one attribute for the first split.** Start with the attribute that changes the message most, usually role or the problem they commented on. Do not split by five attributes at once.
2. **Keep groups small enough to review.** A group of 50 to 150 leads is easy to scan. If a group is much larger, split it by role or region before assigning it.
3. **Write the group name as a sentence.** Use a name like 'Q3 fintech UK mid market' so the owner, market and offer are visible without opening the list.

## Assign workspace access one person at a time

A workspace holds the lead groups and campaigns for one part of the business. Assign an SDR to a workspace, not to your whole account. That keeps the UK list away from the SDR working the US list and stops accidental messages to the wrong market.

Do this after the groups exist. If you invite someone first, they will open the account and see a flat list of everything. Set the boundaries before they start.

1. **Invite with a work email.** Use the address the teammate will keep. A personal address makes it harder to remove access later.
2. **Create a workspace for the work.** Make one workspace per market, product, or campaign pod. Do not create a workspace for every small list.
3. **Add only the lead groups that belong there.** Leave out lists the teammate does not need. If they ask for another list, add it after you know why.
4. **Give the teammate access to that workspace.** Check that they can open the groups and campaigns they need, then ask them to send one test message to an internal account or a friendly lead.

> The test is simple: ask the teammate to name the groups they can see. If they list a group you did not assign, fix it before they send anything.

## Set the sending rules for each account

LinkedIn does not publish exact limits for invites, messages, or profile views. Anyone who gives you a number is guessing or repeating a guess. Work inside whatever limit your account shows and keep the pace slow enough that a person could be typing.

Set daily invite and message limits for each teammate, plus a send window in the lead's time zone. If your team works across markets, a single window for everyone will send at odd hours. Use business hours for the lead's country, or extended hours when you know the buyer checks later.

1. **Choose the window per market.** Set the window in the lead's time zone. A UK lead should not get a message at 2 a.m. because the SDR is in California.
2. **Start below the limit you think you can send.** If an account has not sent much, begin with a low daily number and raise it after a week of normal replies. Do not fill the limit on day one.
3. **Clear stale invites.** A pending invite can sit for weeks. Withdraw invites that are old and have not been accepted so the pending pool does not fill up.

## Check the numbers that matter each week

Look at the health of each account before you look at replies. Pending invites, acceptance rate, and replies by group tell you where the problem is. A low acceptance rate points to the lead profile or the note. A low reply rate on accepted invites points to the first message.

Do not judge a group after ten sends. Give it enough sends to see a pattern, then change one thing: the note, the first message, or the group itself. Changing all three at once tells you nothing.

| | Signal | What it can mean | What to change |
| --- | --- | --- | --- |
| Pending invites | The account is close to its invite limit or the note is not landing | Withdraw old invites and slow the daily send |
| Acceptance rate | The lead profile is too broad or the note is weak | Tighten the group or rewrite the note |
| Replies by group | The script fits one group better than another | Move the better script to the weak group and test again |
| Meetings booked | Replies are friendly but not moving | Ask for a specific time or send a scheduling link earlier |

## Rewrite the first message when replies go flat

The first message after a connection is where most teams lose the thread. A message that says 'Thanks for connecting, I help companies with X' gives the reader nothing to reply to. Open with the reason you found them, then ask a question they can answer in one line.

Keep one version per lead group. If you write a different message for every person, you cannot tell which opening worked. The group name and the comment or post that put them there should shape the first line.

**Weak first message**

- Thanks for connecting. We help teams grow revenue. Do you have time for a call?
- We are a sales tool. Let me know if you want to learn more.

**Specific first message**

- You commented on Northwind's post about routing leads across regions. We handle that inside HubSpot. Are you adding regions this quarter?
- Saw you run sales at a 40 person agency. When a new client signs, how do you split leads between the two SDRs?

- **you:** Saw your comment on the Acme post about routing leads. We built a small tool for that. Are you handling routing in HubSpot or somewhere else?
- **them:** HubSpot. It works until we add a new region, then everything breaks.
- **you:** That is the pattern I hear. Would a 15 minute call on Thursday help? I can show you how we handle region rules.

## Doing this with Kinlead

Kinlead lets a Pro admin invite teammates by email and choose which workspaces each teammate can open. Each teammate uses one extra seat, signs in with their own login, and can connect their own LinkedIn account. The admin pays for every seat.

Removing a teammate ends their access and disconnects the LinkedIn they connected. Lead groups stay in the workspace. You can see the workspace controls on the [workspace features](/features/workspace) page.

## Related

- [Team workspace features](https://getkinlead.com/features/workspace.md)
- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)
- [Lead group and scoring guide](https://getkinlead.com/features/lead-groups-and-scoring.md)

## Common questions

**Can I change which workspaces a teammate sees after inviting them?**

Yes. An admin can update workspace access at any time. Add or remove a workspace without creating a new login.

**Do I need Sales Navigator for every SDR?**

No. If your lead search uses LinkedIn's standard search, an SDR can work without a Sales Navigator seat. Check the tool before you buy seats for the whole team.

**What happens to lead lists when a teammate leaves?**

The lists stay in the workspace. The admin removes the teammate, which ends access and disconnects the LinkedIn account that teammate connected.

**How many leads should one SDR work in a week?**

There is no single number. Match the list size to the number of sends the account can make inside its limits and send window, then adjust after two weeks.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
