# How to run outreach across different company pages
> Organize lead groups and campaigns to target different brands or business units from a single LinkedIn personal profile without mixing up your messaging.
- HTML: https://getkinlead.com/managing-limits-with-multiple-company-pages
- Markdown: https://getkinlead.com/managing-limits-with-multiple-company-pages.md

**Short answer:** LinkedIn outreach happens from a personal profile. Company pages publish posts, but they don't send connection requests or start one to one chats. To target different brands, organize leads into distinct groups and create separate campaigns for each brand's messaging.

## Personal profiles vs company pages

You can't send outbound connection requests from a LinkedIn company page. Company pages publish posts, collect followers and show a brand. They don't start one to one conversations with strangers. That work happens from a personal profile with a name and a face.

All outbound work happens through a personal profile. If you manage three brands, you use your own name and profile to reach out. The brand identity comes from your messaging and who you target. The account type stays personal. This is why a founder can talk about two products from one profile without changing accounts. The reader sees a person. That is the point of LinkedIn outreach.

**Company page**

- Publishes posts and updates
- Collects followers
- Cannot send connection requests or start a one to one chat with a stranger

**Personal profile**

- Sends connection requests
- Starts direct conversations
- Carries your name and face in every thread

## Organizing leads by brand or unit

If you target different business units or brands, one shared list creates mistakes. You will send a message about Brand A's logistics software to someone who commented on Brand B's hiring post. The fix is to separate audiences before you write anything.

Use lead groups. A lead group is a bucket for one segment of people. Create a group for each brand, product line or target persona. A campaign then points at one group, so the message only goes to the people you meant to reach.

A good group name includes the brand and the trigger. Northwind fleet post commenters is better than leads. The trigger tells you why the person is in the group, which helps when you write the first line.

1. **Name the source.** Write down where the lead came from: a competitor company page, a post comment thread, an industry group or a CSV import.
2. **Create one group per brand.** Use a name you will recognize later, such as Northwind logistics leads or Acme hiring leads. Avoid names like general leads or new list.
3. **Add leads as you find them.** Put every profile or URL into the right group the same day. A lead that sits in a general pool will get the wrong message.
4. **Check the group before launch.** Open the group and scan the first few profiles. If you see names from two brands, split the group before you connect a campaign.

## Structuring your campaigns

Once leads are grouped, create separate campaigns for each brand. A campaign links one lead group to one set of messages. This lets you test a different offer for each brand without overlapping.

Give each campaign its own goal and call to action. If Brand A sells consulting and Brand B sells software, the tone and the meeting request should be different. The person reading the message should never wonder which company you represent.

Do not reuse one campaign for two brands just because the offer is similar. The messages will drift toward one brand, and the replies will be hard to sort. Separate campaigns also let you pause one brand without touching the other.

| | Campaign | Lead group | Messaging focus | Primary goal |
| --- | --- | --- | --- | --- |
| Campaign A | Northwind logistics leads | Fleet planning offer | Book a call about Northwind |
| Campaign B | Acme hiring leads | Recruiting software offer | Book a demo for Acme |
| Campaign C | CSV import, manufacturing | Plant maintenance offer | Ask for a fit call |

## Writing brand-specific scripts

Since you use one personal profile for multiple brands, the outreach has to feel natural. You are not pretending to be three different people. You are the founder or operator who works on these products, and the message should say that plainly.

Reference the reason the person became a lead. If you found them because they commented on a post from Brand A's company page, mention that post and the topic. This connects your personal profile to the brand you represent without a fake title.

Keep the same voice across brands. You don't need a different personality for each campaign. You need a different reason for contact, a different offer and a different example. The person should still feel they are talking to you.

- **you:** Hi Sarah, saw your comment on the Northwind post about fleet planning. I work on the team behind that tool and wanted to connect.
- **them:** Hey. Yeah, I had a question about the API integration mentioned in the post.
- **you:** Happy to help with that. I can show you how it works on a short call tomorrow if you're free.

> When you run outreach for several brands, the first line has to explain why this person got a message from you. A generic opener makes every brand look the same.

```
Hi {{first_name}}, saw your comment on {{company}}'s post about {{topic}}. I work on {{brand}} and had the same question about {{detail}}. Open to comparing notes?
```

## Handling people who fit more than one brand

Some leads will fit two brands. A logistics manager might be a buyer for your fleet tool and a candidate for your recruiting software. Do not put that person in both campaigns at the same time. They will get two connection requests or two messages from the same profile, which looks careless.

Pick the brand with the stronger reason for contact. If they commented on a Northwind post about route planning, start there. After they reply, you can mention the other product if it is relevant. One clear first conversation beats two mixed ones.

If the person already replied to one brand, do not send a cold message from the other brand. Continue the conversation you have. You can ask a direct question about the second product after they answer the first one.

1. **Check for duplicates before launch.** Search the lead's profile URL in your groups. If it appears twice, keep the group with the stronger trigger.
2. **Choose the first brand.** Use the post they commented on, the page they follow or the problem they described.
3. **Hold the second brand for later.** If the first conversation goes well, ask whether the other product is also relevant. Do not send a second cold message.

## Tracking replies without mixing the threads

Replies from different brands can land in the same inbox. That is fine if every message carries context. The risk is answering a Northwind lead with Acme pricing because you forgot which campaign sent the message.

Keep the campaign name, the lead group and the original post in view when you reply. If you use a shared inbox, sort by campaign or by intent. Interested replies should get attention first, and every reply should get a human answer in the same thread.

**Mixed reply**

- Thanks for the note. Our Acme plan starts at...
- Sent to a Northwind lead

**Context reply**

- Thanks for commenting on the Northwind fleet post.
- You asked about the API. Here is how it works...

> Before you reply, read the last two lines of the thread. The brand is in the context above the reply. The signature does not carry it.

## Doing this with Kinlead

Kinlead keeps leads in groups, and any campaign can point at any group. You can use the [Steal Customers agent](/features/steal-customers) to watch competitor company pages, read comments on their recent posts, and turn commenters who look like buyers into leads. Each lead keeps the post URL, the post topic and what they commented.

Create one campaign per brand and use a sales playbook for each campaign. The AI writes messages from the campaign's goal, tone and that playbook. You set daily invite and message limits and a send window in the lead's time zone. You can read and edit queued messages on the Actions page before they send.

If you run several brands from one profile, keep the campaign names obvious. Use the brand name and the lead group in the campaign title. When a reply arrives, you can see which brand the person came from without opening three tabs.

1. **Point Steal Customers at the right pages.** Add the competitor company pages and optional founder or employee profiles you want to watch.
2. **Keep leads in separate groups.** Use one lead group per brand so a campaign cannot pull from the wrong audience.
3. **Give each campaign its own playbook.** Put the brand's value proposition and tone in the campaign settings. The AI uses that script when it writes messages.
4. **Check the queue and launch.** Read the queued messages on the Actions page. Pause any campaign that sounds off before it sends.

## Related

- [Book a demo](https://getkinlead.com/demo.md)
- [Steal Customers feature](https://getkinlead.com/features/steal-customers.md)
- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)

## Common questions

**Can I use multiple LinkedIn accounts for different brands?**

Yes, if you use a tool that supports extra accounts, you can connect more than one LinkedIn account. This works well when the brands are unrelated and would look strange coming from one person.

**Will LinkedIn flag me for messaging different types of people?**

LinkedIn does not publish exact limits, so no one can give you a safe number. Messaging different segments is normal. Keep each account inside its own invite and message limits, and avoid identical messages to large lists.

**How do I track which brand is getting more replies?**

Keep one campaign per brand. Then you can open each campaign and see which replies came from that group. If your tool has a shared inbox, sort by campaign or intent.

**Can one lead group feed two campaigns?**

Yes. A lead group is a list, and more than one campaign can point at it. Use this when two offers are genuinely relevant, and make sure the person does not get two connection requests at the same time.

**What if a lead comments on two competitor pages?**

Pick the comment with the clearer buying signal and put the lead in that brand's group. Keep the other page as context for later, not as a reason to send a second cold message.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
