# How to connect with people at a conference on LinkedIn
> Turn conference conversations into LinkedIn leads without looking like a bot. Collect profiles, sort by priority, and send notes mentioning what you discussed.
- HTML: https://getkinlead.com/managing-outreach-during-industry-events
- Markdown: https://getkinlead.com/managing-outreach-during-industry-events.md

**Short answer:** To connect with conference attendees on LinkedIn, collect profile links during the event and send requests after. Sort the list by how well you know each person, write a note that mentions one real detail from your conversation, and send at a pace you can keep steady.

## Collect profiles without sending requests

At the event, you'll want to tap Connect while you're standing with someone. That feels efficient. It also puts every request in the same short window, from the same place, with no time to write a note you'll remember.

Collect profile links instead. You can send later from your desk, where you have the event notes, the attendee list and your calendar in front of you. The delay also gives you a reason to mention the conversation. A request sent three days later with a specific line beats one sent from the venue with no context.

1. **Open their profile, not the connect button.** On mobile, tap More on the profile and choose Copy link. If they offer a QR code in the search bar, scan it and copy the profile URL. Paste the link into a note with their name.
2. **Add one line you'll use later.** Write the detail while it's fresh: asked about EU expansion, runs partner marketing, said their CRM rollout stalled. That line becomes the first sentence of your note.
3. **Record where you met them.** A session name, booth or coffee line is enough. It helps you sort the list and avoid mixing a conference lead with someone from a different event.
4. **Leave the request for later.** Do not send from the venue. Start after you've had time to clean the list and decide who gets a note you write by hand.

## Sort the list before you send anything

Not every profile deserves the same follow-up. If you send the same note to the whole list, you waste your invite allowance on people who barely remember you and give the strong conversations less attention.

Sort by what you actually discussed. The table below is enough for most events. Hot leads get a note you write by hand. Warm leads can use a template with one detail filled in. Cold leads can wait until the event follow-up is done, or come off the list.

| | Priority | What happened | When to send |
| --- | --- | --- | --- |
| Hot | They asked for a demo, intro or pricing conversation. | Next working day, while the event is still fresh. |
| Warm | You had a real conversation, but no next step. | Within two or three days. |
| Cold | You only exchanged a handshake or found them on the attendee list. | After the urgent follow-ups, or skip them. |

> If the organizer gives you an attendee list, treat it as a cross-check. Don't import the whole file and send invites to everyone. Use it to find the people you meant to meet and to fill in company names for your notes. The list is not a lead list until you add context.

## Write a note that proves you were there

Generic messages are easy to ignore. The person met a lot of people and your face is already fading. A note that says great meeting you gives them nothing to reply to.

Specific doesn't mean long. One detail from the conversation is enough. Mention the panel they challenged, the hiring problem they described, or the booth demo they skipped because the line was too long. Keep the note short so it reads like a message, not a cover letter.

**Easy to skip**

- Hi, it was great meeting you at the conference. Let's connect.
- I enjoyed learning about your company. Would love to stay in touch.
- Great event. Let's network.

**Has a reason to accept**

- Hi Sarah, I was the one asking about your EU rollout after the pricing panel. You said the blocker was local support. Would like to follow your posts here.
- Hi Mark, you mentioned your team is testing a partner newsletter. I run one for a 30-person agency and would be glad to compare notes.
- Hi Jane, thanks for the tip on the attendee list export. I'm connecting with a few people from the churn roundtable and wanted to keep you in the loop.

> Write the note by hand for hot leads. Templates are fine for warm and cold leads, but replace the bracketed parts with a real detail. If you can't fill in {{specific_detail}}, the person belongs in the cold pile or off the list.

```
Hi {{first_name}}, I was at {{session_or_place}} when you mentioned {{specific_detail}}. {{reason_to_connect}}. Would be good to stay connected.
```

## Pace the invites after the event

LinkedIn does not publish a set number of invites you can send per day. The limit changes with the account, its history and other signals. Anyone who gives you an exact number is guessing.

The practical approach is to start below what you normally send, keep the same pace for several days, and watch what happens. If people accept and reply, you can add a little volume. If requests sit pending, stop adding and deal with the backlog. The goal is to avoid a spike after a quiet week.

1. **Set one daily number you can keep.** Pick a number you can repeat without thinking about it. The point is consistency, not a burst followed by a week of silence.
2. **Send from one place and one device.** Don't bounce between a phone on event wifi and a desktop on a VPN while you're also sending a lot of requests. Keep the session normal.
3. **Clear old pending invites.** Withdraw requests that have sat unanswered for weeks. A long pending list hides the people who did accept and makes the account look careless.
4. **Pause when LinkedIn pushes back.** If you get a warning or a block, stop invites on that account. Don't test the limit by sending one more.

> If LinkedIn warns you, the next request is not a test. Stop invites on that account and wait until the warning clears.

## Clean the list before you send

Event lists get messy fast. You copy the same person twice, forget which session you met them in, or add a prospect who changed jobs two weeks ago. A short clean-up saves you from sending a note that starts with the wrong company.

- Remove duplicates by profile URL, not by name. Two people can share a name; the URL is the only stable field.
- Check the current company before you write the note. If they moved, use the new company and drop the old event detail unless it still makes sense.
- Delete anyone you can't write one specific line about. A blank note is worse than no request.
- Add the source and date. SaaS Summit, booth 14, 12 May is enough to sort the list later.

> If you can't remember the conversation, don't fake it. Send a plain request or leave them off the list.

## Follow up after they accept

Acceptance is the start. The follow-up should continue the conversation, not restart it. If they accepted without a note, remind them where you met in one line and ask about the problem they mentioned.

- **you:** Thanks for accepting, Sarah. The point you made about local support in the EU stuck with me. Is that still the main blocker for the rollout?
- **them:** Yes, mostly. We can sell there but support coverage is thin.
- **you:** Makes sense. We ran into the same thing when we opened a small office in Dublin. Happy to share what worked, if useful.
- **them:** That would be helpful. Maybe next week?

> If they don't reply, wait. One follow-up after a week is enough for most event contacts. Add something useful: a link to the session recording, a note from the talk, or an intro to someone they asked about. Don't send just bumping this.

## Doing this with Kinlead

Kinlead fits the part after you've collected the profile links. You can import a CSV of LinkedIn profile URLs into a lead group, then point a campaign at that group. The campaign sends from your own LinkedIn account inside the daily invite and message limits you set and inside a send window in the lead's time zone.

Connection requests can carry an AI-written note under 200 characters that opens with why that person became a lead. You can read and edit queued campaign messages on the Actions page before they send, and pause any campaign if the list needs cleaning. Lead groups are explained at [lead groups and scoring](/features/lead-groups-and-scoring).

## Related

- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)
- [Book a demo](https://getkinlead.com/demo.md)

## Common questions

**Should I use a generic message for everyone at the event?**

No. A note with one real detail gives the person a reason to accept and makes it easier to start a conversation later. Generic notes get skipped.

**What happens if LinkedIn restricts my account during a conference?**

You'll usually see a warning or a block on sending invites. Stop invites on that account, don't test it with one more request, and wait until the warning clears.

**Is it better to connect during the event or after it ends?**

Collect profiles during the event and send after. That gives you time to sort the list, write specific notes and keep your sending pace steady.

**How many people should I connect with from one event?**

Only the people you can write a real note to or have a reason to follow up with. A short list with context is easier to work than a full attendee list.

**Should I mention the event in every message?**

Mention it in the connection note. After they accept, move to the problem or topic you discussed. Repeating the event name in every message sounds like a mail merge.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
