# How to restart LinkedIn outreach after changing jobs
> A step by step plan for updating your job title and company on LinkedIn, pausing outreach, then ramping back up slowly without a profile review.
- HTML: https://getkinlead.com/managing-outreach-during-job-changes
- Markdown: https://getkinlead.com/managing-outreach-during-job-changes.md

**Short answer:** Changing your title or company on LinkedIn is normal. The days right after a change are a bad time to run full-volume outreach, because a fresh profile plus a sudden burst of requests is what gets accounts pushed back on. Pause new invites for two or three business days, keep replying to open threads, then ramp back up from below the volume your account already handled.

## Why a job change is a risky moment for outreach

LinkedIn doesn't publish how it decides an account deserves a closer look, and anyone who gives you exact rules is guessing. What you can see is the pattern. Accounts that suddenly start sending a lot of requests to strangers get pushed back on, and a profile that changed yesterday makes that pattern easier to read.

Changing jobs is normal. The problem is what usually happens next: someone updates their headline, imports a fresh CSV of leads, and launches a campaign the same afternoon. From the outside that looks like an account being repurposed rather than a person starting a job.

There's a second risk that has nothing to do with automation. Your old leads know you as the person at Northwind. If a message from the new title at Acme lands with no explanation, some of them will report it, and reports are what actually get accounts restricted.

**What gets an account flagged**

- Updating your title, then launching a new campaign the same day
- Sending the old pitch from the new company to leads who knew the old one
- Going straight back to your highest ever daily volume

**What a normal job change looks like**

- Update the profile, then leave outbound alone for a few business days
- Reply to open conversations first, with a line about the move
- Come back at half your old volume and add slowly

## The first three days after you update your profile

Treat the update as two separate steps. Profile first, outreach second. The gap between them is what keeps you unremarkable to a system that's watching for sudden change.

You're not silent during the gap, you're just not prospecting. Replying to people who message you, commenting on posts, accepting invitations that are already sitting there: that's what a real person does in their first week.

1. **Update the whole profile in one sitting.** Add the new company and title, fix the headline, and check that your about section doesn't still describe the old job. A half-updated profile is what a lead sees when they check you after a reply.
2. **Pause every campaign.** Not only the new ones. Any sequence that sends connection requests or first messages should be off, including the ones you forgot were running.
3. **Leave new invites alone for two or three business days.** Two days is enough for a title change at the same company. Give it three if you moved to a different company or a different industry.
4. **Keep the account active in normal ways.** Comment on a few posts from new colleagues, accept pending invitations, answer anyone who writes to you. This is also when you read your new company's content so you can talk about it later.

> The cooldown is about order, not a magic number of days. Update first, prospect second, and never both in the same hour.

## Ramping back up at a pace your account has already handled

The number you ramp back to isn't a LinkedIn number, because LinkedIn doesn't publish one. It's the volume your account was sending before the change without warnings. If you had a steady week with no pushback, that's your ceiling. It isn't your starting point.

Start well below it and add in small steps. The ramp exists so you can spot a warning before it becomes a restriction. If acceptance drops or LinkedIn starts asking you to verify something, you went too fast and you can pull back.

Two things make the ramp easier. Send to people likely to accept, and keep the first message short. A week of real replies does more for the account than any amount of waiting.

Don't compress the ramp into one big day because you're behind on pipeline. The whole point is that the account sees a person settling into a job, not a switch being flipped back on.

| | Day | What to send | Volume |
| --- | --- | --- | --- |
| Day one | Replies to open threads and anyone who messaged you | No new invites |
| Day two | Requests to people you already know: former colleagues, event contacts, inbound leads | A handful, written by hand |
| Day three | First cold requests, sent one at a time | About half your old daily average |
| Day four onward | Normal campaigns, checked daily for warnings | One small step up every few days until you're back at the old number |

## Update your targeting before you update your pitch

A new company means a new buyer. The list that worked at a 40-person agency rarely works at a software company selling to operations teams, and reusing it is how you end up with messages that don't make sense.

Write the new buyer down before you touch a search bar. One sentence: who has the problem your new product solves, and what they were doing before they went looking. If you can't write that sentence, you're not ready to send anything.

1. **Write the one-line buyer.** Keep it specific enough that you could name three real people who fit. Operations leads at manufacturers with more than one warehouse works. B2B companies doesn't.
2. **Rebuild your search strings.** Old strings were built around the old product. Search for the new problem, not the new job title.
3. **Check what your new title lets you say.** A smaller title at a bigger company can still open doors, and a bigger title at a smaller one sometimes can't. Be honest about which conversations you can start and which belong to someone else on the team.
4. **Start a new lead group instead of reusing the old one.** Old leads aren't dead, they're a different conversation. Keeping them separate stops a cold pitch going to someone you used to work with.

## What to say to leads who knew your old title

People you already spoke to will notice the change, and the ones who liked you will reply. That's an opening, not a problem to manage.

The message that works is short and specific: where you went, why, and what it might mean for them. No announcement post, no excited to share.

- **you:** Hi Sarah, I've moved to Acme, where I work on freight for manufacturers running more than one warehouse. Northwind still has two, so I thought this might still be relevant. Worth a short call next week?
- **them:** Congrats on the move. We're reviewing carriers in March actually. What does Acme do differently?
- **you:** We consolidate part loads so you're not paying for a full truck on a half load. I can send a one page breakdown before we talk.

> If you're not sure the move is relevant to someone, say so and ask. Not sure this is useful to you now, but I've moved to Acme and we do X. Want me to keep you posted? That gets replies because it gives them an easy way to say no.

```
Hi {first name}, I've moved from {old company} to {new company}, where I work on {problem you solve, in one line}. When we last spoke you mentioned {specific detail}, so this may still be relevant. Worth a short call?
```

## Doing this with Kinlead

Kinlead is one way to run the pause and the ramp without rebuilding everything by hand. Campaigns can be paused from the campaign view, and lead groups stay where they are while you're away.

When you restart, point the first campaign at a new lead group built for the new role. The [Steal Customers agent](/features/steal-customers) watches competitor pages and the comments on their posts, then turns commenters who look like buyers into leads, with the post and the comment attached. That's a sensible first campaign after a move, because the people in it are already talking about the problem you now sell into.

- Pause every campaign before you edit your profile, then restart them one at a time.
- Set daily invite and message limits in Settings to the ramp you planned, and raise them as the week goes well.
- Read queued messages on the Actions page before they send, so nothing goes out in the old company's voice.
- Keep old leads in their own group so the new pitch doesn't reach people who knew you before.

> Kinlead can't stop LinkedIn restricting an account and doesn't warm one up for you. It keeps sending inside the limits and [send windows](/features/campaigns-and-send-windows) you set.

## Related

- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)
- [Campaigns and send windows](https://getkinlead.com/features/campaigns-and-send-windows.md)
- [Steal customers agent](https://getkinlead.com/features/steal-customers.md)
- [Book a demo](https://getkinlead.com/demo.md)

## Common questions

**Should I change my LinkedIn title before or after I start outreach?**

After. Update the profile first, leave new invites alone for two or three business days, then start sending again below the volume you used before the move.

**Can I keep my old campaigns running while I update my profile?**

Pause them. A campaign written for your old company will send the wrong pitch from your new title, and that mismatch is what gets messages reported.

**What do I do if LinkedIn asks me to verify something after a change?**

Stop sending new invites, finish the verification, and reply to open threads while you wait. Adding volume in the middle of it makes things worse.

**Do I need to tell old leads that I moved?**

Only the ones you plan to contact again. A short line about where you went and why it's relevant beats a mass update, and it gives them an easy reason to reply.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
