# LinkedIn lead generation strategy for B2B agencies
> Find B2B agency leads by targeting people who comment on competitor posts, then use context-first outreach to start conversations and book demos.
- HTML: https://getkinlead.com/playbook-for-ai-lead-generation-for-agencies
- Markdown: https://getkinlead.com/playbook-for-ai-lead-generation-for-agencies.md

**Short answer:** B2B agencies find leads on LinkedIn by watching who comments on competitor posts. You look for people asking questions or describing a problem your service fixes, save the post and comment, then open with that context instead of a pitch.

## Find your high-intent source

Start with companies that sell what you sell. Pick five to ten competitors whose customers look like the ones you want. If a competitor posts every day, you get a steady stream of people to review. If they post once a month, skip them.

The company page is only part of it. Founders, heads of growth and senior strategists often get more comments than the brand account. Add those profiles to your list. A comment on a founder's post can be easier to use because the conversation is already personal.

You are not looking for every comment. You want the ones where someone describes a problem, asks a question or pushes back on the advice. Those comments tell you what to say next.

1. **List the competitors.** Write down five to ten companies that offer the same core service. Check that their customers match your target account list.
2. **Add the people who post.** Find the founder, head of growth or lead strategist at each company. These accounts usually get more comments than the company page.
3. **Pick posts with real discussion.** Look for posts with questions, disagreements or people describing a problem. Skip hiring posts, event photos and simple announcements.
4. **Save the comment, not just the name.** Copy the post URL and the comment text into a sheet. You will need both when you write the first message.

> You only need a handful of active competitors. More sources do not help if you never work the comments.

## Categorize leads by intent

A list of names is not enough. Two people can comment on the same post for different reasons. One wants a fix. One wants to argue. Another is a competitor watching the thread. Sort them before you write anything.

Use plain labels that tell you what to send. The label should point to the next message, not describe the person's job title.

If you cannot write a useful next sentence from the comment, the lead is not ready. Leave it in the sheet and move on.

| | Lead type | What they said | What to send |
| --- | --- | --- | --- |
| Pain | Complained about a tool, a cost or a result | A short note about how you handled that problem |
| Curiosity | Asked how a result was achieved | A relevant example or a short how-to |
| Comparison | Asked how one service differs from another | A clear answer about your approach |
| Skeptic | Questioned the advice or asked for proof | One specific example, no pitch |

## The context-first outreach method

Use the first message to show you read the comment and have something useful to say. Do not pitch yet. The comment gives you a reason to write. Use it.

Mention the topic, not the competitor's name in a creepy way. For example, if someone asked about attribution on a competitor's post, say you saw their question about attribution. You do not need to say you are watching the competitor.

Keep the note short. A connection request note has a character limit, so write one sentence of context and one sentence of value. If you are already connected, send a direct message with the same structure.

**Generic outreach**

- Hi, I saw you commented on Acme's post. I run an agency that does the same thing. Want to chat?
- Hello! I noticed you are interested in growth. My agency helps companies scale. Do you have time for a call?

**Context-first outreach**

- I saw your question about scaling ad spend on Northwind's post. I dealt with that same issue for a client last month by shifting the attribution model. Happy to share the doc if it helps.
- Your comment about API integrations on Acme's post caught my eye. We built a workaround for that last year. I can send the steps if you are still stuck.

> Never pitch your agency in the first message. Offer one specific thing related to the comment, then stop.

```
Hi [first name], I saw your question on [competitor]'s post about [topic]. I put together a short note on [specific fix]. Want me to send it?
```

## Managing the conversation flow

Once someone replies, you have a reason to keep talking. Keep the thread on the problem they raised. Ask one question about the problem. Do not jump to a calendar link.

When they describe the problem in more detail, you can offer a short call. Say what you will cover and how long it takes. A 15-minute call about the specific issue is easier to accept than a demo.

- **you:** Here is the doc on attribution I mentioned. Page 3 shows the setup we used for a 40-person agency to fix their reporting.
- **them:** Thanks. That's exactly what we're struggling with right now.
- **you:** Glad it helps. Are you trying to fix this for one channel or across the whole account?
- **them:** Across the whole account, mainly Facebook and Google.
- **you:** That is usually where it gets messy. I have a few more ideas on how to clean that up. Do you have 15 minutes on Thursday to walk through it?
- **them:** Thursday works. Send an invite.

> If they ask a question you cannot answer, say you will check and come back. That is better than guessing.

## Keep the list clean and useful

A comment list gets messy fast. People change jobs, posts get deleted, and old comments stop being relevant. Clean the list before you run a campaign.

Remove anyone who is a competitor, a recruiter, or a current customer. Remove comments that are only praise. If the comment does not give you a reason to write, it is not a lead.

- Check the profile before you save the lead. Confirm the person works at a company that fits your target account list.
- Keep the post URL. If the post is deleted, the context is gone and the message will sound strange.
- Set a date on each lead. A comment from six months ago is not a live signal.
- Write one sentence about why the lead is a fit. If you cannot, delete the lead.

> A smaller list with real comments beats a large list of names with no context.

## Doing this with Kinlead

Doing this by hand for a few competitors is possible. Doing it for many competitors every week gets old. Kinlead handles the discovery and the first message while keeping the comment context.

The [Steal Customers agent](/features/steal-customers) watches competitor company pages and optional founder or employee profiles. It reads comments on recent posts and turns commenters who look like buyers into leads. Each lead keeps the post URL, what the post was about and what they commented.

1. **Set up the agent.** Add competitor pages and the people who post there. Leads are scored from 0 to 100 against your customer profile and kept in lead groups.
2. **Write the campaign.** Point a campaign at the lead group. Connection notes are written by AI and open with the reason the person became a lead. Notes stay under 200 characters.
3. **Set the pace.** Choose daily invite and message limits and a send window. Kinlead sends at most one action every 5 minutes per LinkedIn account.
4. **Handle replies.** Replies from every campaign land in the unified inbox, classified by intent. You can hand off at the first reply, let the AI reply until there is real interest, or let it reply until a meeting is booked with your scheduling link.

> Kinlead connects through Unipile and never stores your LinkedIn password.

## Related

- [Steal Customers feature](https://getkinlead.com/features/steal-customers.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)
- [Booking LinkedIn demos](https://getkinlead.com/use-cases/book-linkedin-demos.md)

## Common questions

**Do I need Sales Navigator to find competitor commenters?**

No. LinkedIn's standard search and profile monitoring are enough to find people who comment on competitor posts. A Sales Navigator seat is not required.

**How do I avoid sounding like I am spying on competitors?**

Talk about the prospect's problem, not the competitor's post. Say you saw their question about a topic. Leave out the part where you were watching the competitor's page.

**What if the lead is happy with the competitor?**

Some will be. People who comment with questions or complaints often have a gap in their current service. If they are happy, they will ignore you or say so. Move on.

**How many competitors should I monitor?**

Start with five to ten that post often and whose customers match your target list. Add more only when you are working the comments you already have.

**Should I mention the competitor's name in the message?**

Usually no. Mention the topic or the question. Naming the competitor can make the message feel like a surveillance report.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
