# How to find leads from event speakers
> Turn a conference speaker list into qualified LinkedIn leads with a repeatable process, from copying the agenda through to sending the first message.
- HTML: https://getkinlead.com/prospect-using-industry-speaker-lists
- Markdown: https://getkinlead.com/prospect-using-industry-speaker-lists.md

**Short answer:** Copy the speaker list from an event agenda into a spreadsheet, find each speaker's LinkedIn profile URL, then filter out anyone who cannot buy. The people worth messaging are the ones with budget authority who posted about their own talk.

## Pick the right events

Most conference speaker lists are full of people who cannot buy anything. Vendor engineers, recruiters working a booth, a moderator from the event organiser. You want events where the people on stage run the function you sell to.

Niche summits beat broad trade shows almost every time. A 300-person operations conference puts more budget holders in the room than a 10,000-person expo, and the speaker list is short enough to work through in an afternoon.

Look at who is leading a workshop or sitting on a panel rather than who is giving the keynote. Keynotes get booked for the name. Workshop leads get asked because they do the job.

Finding these events takes ten minutes a week. Follow the associations your buyers belong to, check the Events tab on a few target company pages, and ask two customers which conferences they actually attend. Their answer is usually more useful than any list you can buy.

- Check the last two editions, not just this year's agenda. Speakers who come back are usually senior.
- Skip any session where the speaker's company also has a booth. That person is there to sell.
- Prefer events that publish job titles next to names. It saves a lookup later.
- Note the date of each talk. A speaker from eight months ago is a colder lead than one from last week.

| | Event type | Who usually speaks | Worth your time |
| --- | --- | --- | --- |
| Vendor-run webinar | Sales reps and marketing managers | Rarely. The speaker is pitching, not buying. |
| Niche industry summit | Directors and VPs from operating companies | Yes. These people own the problem you sell against. |
| Broad trade show | A mix of vendors, recruiters and junior staff | Only if you filter the list hard. |
| Association meetup | Long-tenured practitioners and consultants | Sometimes. Check company size before you bother. |

## Get the speaker data

Copy the speaker list into a spreadsheet before you do anything on LinkedIn. Searching first and listing second means you lose track of who you have already found.

Keep one row per person and one column per fact. When you have sixty speakers across four events, the sheet is the only thing stopping you from messaging the same VP twice.

Clean as you go. Delete moderators, event staff and anyone whose title is a sales role at a vendor. Then check that each speaker still works where the agenda says. Speaker pages go stale, and a message to a former employer reads badly.

Do this by hand for the first event. A scraper will happily pull in sponsors, panel hosts and last year's speakers who never showed, and you will spend longer cleaning the output than you would have spent typing.

1. **Copy the list.** Highlight the names, titles and companies from the speaker page and paste into your sheet. Plain text paste is fine.
2. **Split the columns.** Put name, title and company in separate columns so you can sort and filter later.
3. **Cut the noise.** Delete moderators, organisers, sponsors and anyone selling to the same room you are.
4. **Check current employers.** Search each name on LinkedIn. If the company has changed, update the row before you go further.

```
name,title,company,profile_url,event,talk_topic,posted_about_event,fit_score
Sarah Okonjo,VP Operations,Northwind,https://linkedin.com/in/example,Ops Summit,Scaling support teams,yes,
```

## Find the LinkedIn profiles

Search the name and the company together. That combination is usually enough. If it returns nothing, add the event name, then the city.

Common names need one more filter. Open the People tab in LinkedIn search and filter by current company. That cuts a list of forty Sarah Chen results down to two.

Copy the full profile URL into your sheet. Not the name, not the handle. The URL is what you import later, and it is the only reliable way to tell two people with the same name apart.

Work in batches of ten. Searching forty names in one sitting is where mistakes creep in, and a wrong URL means a message to a stranger who has no idea what event you are talking about.

- Name plus company first.
- Name plus event name second.
- Name plus city third.
- If all three fail, search the event hashtag and look for posts tagging the speaker.

## Qualify the leads

Speaking on a panel proves someone has something to say. It does not prove they can sign a contract. A staff engineer who talks at every conference in the space is a useful person to know and a bad person to open a sales conversation with.

Sort by title first, then company size. Director and above at a company in your size range is the shortlist. Below that, keep the profile in the sheet but move it to a second tab.

The other signal is activity. A speaker who posted about their own talk two days ago is still thinking about the event. Someone whose last post is from last spring will probably not see your message.

Revisit the second tab every few months. People get promoted, and the senior engineer you skipped in March is sometimes the director of engineering in September.

**Weak lead**

- Title: senior consultant, independent
- Company: no employees listed
- Last post: eight months ago
- Talk topic: general industry trends

**Strong lead**

- Title: VP operations at a 200-person software company
- Company: fits your size range and industry
- Posted a photo from their session two days ago
- Talk topic: the exact problem you sell against

> A speaker who posted about their own talk is worth three who did not. Start there.

## Write the first message

Reference the talk, not the event. "I saw you spoke at Ops Summit" sounds like a mail merge. "Your point about ticket routing during the Q&A" does not.

Keep the connection note short. LinkedIn caps it under 200 characters, so you have room for one specific line and one reason you are reaching out. Skip the compliment sandwich.

If they accept, send a real message within a day. Ask a question about the talk. Do not pitch on the first reply, and do not attach anything.

Plan one follow-up about a week later if they go quiet, then stop. Two messages after a conference is normal. Five is a reason to report you.

- **draft:** Hi Sarah, your Q&A point about routing tickets by customer tier is the exact problem we work on. Would like to connect.
- **you:** Thanks for accepting. Did the tier routing hold up after the summit, or did you end up rebuilding it?
- **them:** We rebuilt the escalation rules twice. Still not happy with how it works at month end.
- **you:** That matches what we see. Is it the tooling that breaks, or the handoff between support and success?

```
Hi {first_name}, your {talk_topic} session at {event_name} covered the same problem our {customer_type} keep raising. Would like to connect.
```

## Keep the list alive between events

The sheet from one event is the start of the next one. Speakers rotate between conferences in the same niche, so a name you found in March often turns up on a September agenda somewhere else.

Sort by fit score and look at who you never contacted. Those are warm leads sitting idle. A speaker who ignored you in April might reply in October when their priorities shift.

Also check who spoke at the event but was not on your original shortlist. The second pass is where you find the operations director you missed because their title did not match your filter.

- Mark every row with the date you last touched it.
- Re-check job titles before each new event, because people move.
- Keep a separate tab for speakers who never replied and revisit it quarterly.

## Doing this with Kinlead

Import the sheet as a CSV of LinkedIn profile URLs into a lead group. Describe the customer you want, or point Kinlead at your website, and it scores every speaker from 0 to 100 against that profile. Anyone below your fit line is dropped, so the second tab of near-misses never reaches a campaign.

From there, a campaign can point at the group and send a connection note under 200 characters that opens with why that person became a lead. Outreach runs from your own LinkedIn account through Unipile, at most one action every 5 minutes, inside the send window you set for the lead's time zone. Queued messages can be read and edited on the Actions page before they go out. Lead groups and scoring are covered in more detail on the [lead groups and scoring page](/features/lead-groups-and-scoring).

1. **Import the URLs.** Export your sheet as CSV and import it into a lead group.
2. **Score against your profile.** Describe your buyer or use your website. Kinlead keeps only leads above the fit line.
3. **Build the campaign.** Point a campaign at the group and let the AI write the note from the campaign goal and tone.
4. **Review before it sends.** Check queued messages on the Actions page and pause the campaign if the wording drifts.

## Related

- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)
- [Connection note templates for events](https://getkinlead.com/ai-connection-note-templates-for-events.md)
- [Book a demo](https://getkinlead.com/demo.md)

## Common questions

**How do I handle speakers with common names?**

Search the name, company and event together, then filter by current company in the People tab. If that fails, look for posts tagging the speaker from the event hashtag.

**Should I message speakers right after the event?**

Yes, within a few days. The talk is still fresh and they are more likely to remember the context. Waiting a month turns a warm lead into a cold one.

**What if the event page does not list company names?**

Search the speaker's name plus the event name on LinkedIn. Other attendees often tag speakers in recap posts, which leads you to the current profile.

**Is it worth contacting speakers from events I did not attend?**

Often yes, if you can reference the talk itself. Watch the recording or read the slides so your first line is about the content rather than the venue.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
