# Scaling LinkedIn outreach with founder and SDR profiles
> Split LinkedIn outreach between a founder and an SDR: which leads each one targets, how each one writes, and how to keep both accounts healthy.
- HTML: https://getkinlead.com/scaling-outreach-with-founder-and-sdr-profiles
- Markdown: https://getkinlead.com/scaling-outreach-with-founder-and-sdr-profiles.md

**Short answer:** Give each profile a different job. The founder writes to a short list of accounts worth winning by hand, and the SDR works the wider list with a repeatable process. Splitting the work keeps the founder's name credible and spreads account risk across two profiles instead of one.

## The tiered outreach strategy

Sending the same message from a founder profile and an SDR profile doesn't work, because people read the two roles differently. An executive reads a note from another founder as a peer message. The same words from an SDR read as a sales approach. A founder sending a generic pitch spends credibility with the exact people they wanted to meet.

So give each profile a job. The founder opens doors at accounts you actually care about winning, at a volume low enough that every message can be written for one person. The SDR runs the wider list, tests angles, and finds the leads who are ready to talk now. The founder never becomes the volume channel, and the SDR never has to pretend to be a peer.

The split also spreads risk. Two accounts sending modest volumes are in less trouble than one account sending everything, and a warning on one doesn't stop the other.

**One profile does everything**

- Founder sends the same generic invite to every title on the list
- SDR writes to VPs and founders with a template built for managers
- All outreach stops when that one account gets a warning

**Two profiles, two jobs**

- Founder sends a short, specific note to a dozen named accounts
- SDR works the rest of the list and tests which angle gets replies
- A warning on one account leaves the other campaign running

## Splitting the lead list

Sort by what the person can decide, not by how long the list is. A VP of operations at a 200-person company can sign off. A director at the same company can champion you but probably can't sign. Both are worth a message, and they shouldn't come from the same profile.

Tier 1 stays small on purpose. Pick the accounts where a win would change your quarter, plus anyone whose title puts them at the top of the buying group. Everyone else is Tier 2. If the Tier 1 list grows past what one person can write by hand in a morning, it isn't Tier 1 anymore.

1. **Export the list.** Pull prospects into a CSV with job title, company and company size. If you built the list from LinkedIn searches, keep the profile URL for each person so you can re-import later.
2. **Add a tier column.** Mark each row Tier 1 or Tier 2. The test is one question: would a founder's name change the outcome of this conversation?
3. **Give tier 1 to the founder.** Keep this group somewhere the founder can see every name. A few dozen accounts is workable because each one gets written by hand.
4. **Send tier 2 to the SDR.** This is the volume group. The SDR can run several angles here because nobody's personal reputation rests on any single message.
5. **Review after two weeks.** Look at which tier is starting conversations. A Tier 2 lead who replies well can move up when the founder follows up personally.

## Messaging by profile authority

The founder's note should read like something only that person could send. Mention the thing you noticed, say why you're writing, and keep the ask small enough to answer in one line.

The SDR's note has to earn attention without a title behind it. Lead with the problem and the group you solve it for, then make the ask concrete.

| | Dimension | Founder profile | SDR profile |
| --- | --- | --- | --- |
| Opening line | Something you noticed about their company this month | The problem you solve and who you solve it for |
| Credibility comes from | Their title and the fact they wrote it themselves | Specific examples from similar companies, described plainly |
| The ask | An opinion or a short conversation | A call with a day and time attached |
| What to avoid | Pitching features or asking for a demo | Talking about the founder's vision |

- **you:** Priya, saw Northwind opened a second warehouse outside Leeds. I run a 40-person agency and most of our work is inventory ops across multiple sites. Curious how you're handling it with the new site.
- **them:** Honestly, badly. Two of the three sites are still on spreadsheets and the third is on a system nobody likes.
- **draft:** That's the stage where most of the operators I talk to start looking. Would it be useful to compare notes on what the first 90 days looked like at a similar three-site business? I'm mostly curious whether the same bottlenecks show up.

## Keeping both accounts safe

LinkedIn doesn't publish exact invite or message limits, and any number you see quoted is someone's guess. What matters is whether the account looks like a person using it. Actions spread through the working day, notes that read like they were written for one person, and a pending pool that gets cleared all push in that direction.

The clearest early warning is your acceptance rate. If a growing share of your invites sit unaccepted, LinkedIn is reading your requests as unwanted. The fix is to slow down and tighten the targeting, not to send more.

Check both accounts in Settings where you can see them side by side. If one gets a warning, pause that account for the day and let the other keep running.

- Clear pending invites before adding more. An invite nobody accepts blocks that person from being contacted again.
- Space actions out. A burst of requests in ten minutes looks nothing like a human working through a list.
- Write notes you'd be happy for the recipient to screenshot.
- Keep the founder's volume low enough that replies get answered the same day.
- Watch each account separately. A dashboard that averages two accounts hides the one in trouble.

> If one account gets a warning, pause it that day. Running the second account harder to make up the volume is how teams lose both.

## When both profiles reach the same account

Two people from the same company messaging the same buyer is normal. It becomes a problem when the messages contradict each other or the buyer gets the same pitch twice with different names on it.

Whoever has the live conversation owns it. The other profile stops, and if the relationship is further along than the SDR expected, the founder introduces them by name in the same thread.

Better still, stop the overlap before it starts. Tag accounts in your own system so the SDR can see which companies the founder is already working, and check that list before each new batch.

```
Hi Dana, adding Marta here. She handles scheduling and the day-to-day on our side, so you're not waiting on me between calls. I'll stay on the thread for anything commercial.
```

## Doing this with Kinlead

Kinlead connects both LinkedIn accounts through Unipile, so the founder and the SDR each send from their own profile and nobody shares a password. Leads sit in [lead groups](/features/lead-groups-and-scoring) and are scored against the customer profile you describe, so the Tier 1 line is something you set once rather than a spreadsheet you maintain.

Each campaign points at one group and sends inside its own window, at most one action every 5 minutes per account, within the invite and message limits you set. Settings shows pending invitations and acceptance rate with warnings. If LinkedIn pushes back on an account, Kinlead pauses invites on it and emails you.

1. **Connect both profiles.** Add the founder's LinkedIn and the SDR's through Unipile. Pro includes one LinkedIn account and each extra account is $40 a month, less per account in larger numbers.
2. **Build the two groups.** One group for Tier 1 accounts, one for the wider list. Score both against the same customer profile so the split holds as the lists grow.
3. **Run two campaigns.** Point each campaign at its group, give each its own tone and sales playbook, and set a separate send window in the lead's time zone.

## Related

- [AI LinkedIn outreach](https://getkinlead.com/features/ai-linkedin-outreach.md)
- [Lead groups and scoring](https://getkinlead.com/features/lead-groups-and-scoring.md)
- [LinkedIn account safety](https://getkinlead.com/features/linkedin-account-safety.md)

## Common questions

**What happens if a lead replies to both the founder and the SDR?**

Whoever has the live conversation keeps it and the other profile stops sending. If the founder started it, they can introduce the SDR in the same thread so the buyer isn't managing two relationships at once.

**Should the SDR write in the founder's voice?**

Write as themselves. Ghostwritten founder messages fall apart the moment the buyer gets on a call with someone else. Save the founder's name for messages the founder actually sends.

**How many LinkedIn accounts should a small team run?**

One per real person who will send and answer messages. Adding accounts you don't have people for means replies sit unanswered, which is the fastest way to get reported.

**Who writes the messages, the founder or the SDR?**

Each writes their first few by hand and keeps the ones that got replies as templates. Copy someone else's voice and the difference between the two profiles disappears, which is the whole point of the split.

[Create a Kinlead account](https://getkinlead.com/signup) or [book a call](https://getkinlead.com/demo) to talk through pricing and setup.
